UK Monster Owners Club Forum » .: Warm Up Area :. » A nice place for new members to say hello » Greetings All

Reply
 
Thread Tools Rate Thread Display Modes
Old 09-08-2019, 03:49 PM   #1
tricky1962
Guest
 
Posts: n/a
Greetings All

I have been fancying a Monster for a while. Finally finances have made this possible. I took a 796 out for a short test ride a few days ago.

Before purchasing I have a few questions. Where is the best place to ask them? Here?

Cheers
  Reply With Quote
Old 09-08-2019, 03:54 PM   #2
Ron1000
Registered User
 
Ron1000's Avatar
 
Join Date: Jun 2015
Location: Livingston
Bike: M1100evo
Posts: 867
Hello there and welcome.

Depends on the question, there's relevant sections for technical, tyres, engine etc etc.
Ron1000 is offline   Reply With Quote
Old 09-08-2019, 04:09 PM   #3
tricky1962
Guest
 
Posts: n/a
Cheers

If I start here, can someone tell me to move if necessary?

I've been ridiing since the late seventies. The newest bike I've owned was a 1982 R80. I currently have a 1972 Suzuki T500.

For the first time ever, I encountered a SMIDSY and my 1960s designed SLS front brake barely pulled me up in time. So now it's time to upgrade to ABS etc and therefore the excuse to buy the Monster I coveted.

First question, I went out for a short accompanied test ride on a 2012 796+. It had about 1500 miles on the clock. The engine pulled wonderfully, but laboured really badly I 2nd and third below 4000rpm. Is this normal?
  Reply With Quote
Old 09-08-2019, 04:38 PM   #4
Uncle Bob
Registered User
 
Uncle Bob's Avatar
 
Join Date: Jan 2017
Location: Milton Keynes
Bike: M1100evo
Posts: 233
Is it normal? Oh yes!

Welcome to the forum. If you have a little search there's acres of info about the agrigultural feel of big air cooled V-twin (L-twin) Monsters on here. It seems particularly prevalent on the 1100evo, which I have now and I'm still trying to get to the bottom of, and I had the same thing on my 696+ too.

Some people call it 'character'
Uncle Bob is offline   Reply With Quote
Old 09-08-2019, 04:50 PM   #5
tricky1962
Guest
 
Posts: n/a
Character's fine providing I know that's what it is.
This thing had a Termi exhaust so reving above 4000rpm seemed antisocial.
I don't want to be rude about your bikes chaps, but does the term agricultural extend to the gearbox too?

Sod it, third question as I'm on a roll.

There was no gear indicator (not a problem) but no neutral light too, which given the gearbox behaviour meant it took some time to ensure I was in neutral when I stopped. Is that normal/character//something that can be changed on the display?


I'm sorry if this is coming over as moaning, but I was looking to buy the thing and walked away thinking with the roads I ride on maybe not. I did have a second test ride somewhere else lined up to confirm/deny what I'd thought, but work got in the way so that has to be rescheduled

Last edited by tricky1962; 09-08-2019 at 04:53 PM..
  Reply With Quote
Old 09-08-2019, 05:00 PM   #6
Nickj
Too much time on my hands member
 
Nickj's Avatar
 
Join Date: Jun 2007
Location: Forest Of Dean
Bike: S2r
Posts: 3,206
I think you'll find that anything that's Euro 3 or higher is a bit like that, multi's just hide it a bit better than a twin. The mix and sometimes timing is set up to limit the emissions and engine noise to get to the spec rather than to perform optimally.

You can engineer it out

LOL Almost anything made in the last 20 years with disc brakes will do better than a SLS or TLS set up, though I do remember a fontana 4LS set up that was a bit on the sharp side
My S2R has the 'low spec' brembo units and they scrub off speed quite rapidly when you need them to.

Just go for the one that makes you smile the most and still does what you need it to do.
__________________
"The final measure of any rider's skill is the inverse ratio of his preferred Traveling Speed to the number of bad scars on his body." Song of the sausage creature
Nickj is offline   Reply With Quote
Old 09-08-2019, 05:10 PM   #7
Nickj
Too much time on my hands member
 
Nickj's Avatar
 
Join Date: Jun 2007
Location: Forest Of Dean
Bike: S2r
Posts: 3,206
Neutral finding I've always found the chain tension needs to be right for it to be good and the gearboxes are pretty sweet really. Mostly it's just getting used to the feel'
There will be neutral indicator somewhere, I thought it was a green light on those.
On Termis to quote the MOT requirements It must be loud enough to be heard by other road users Oh that's the horn, silly me No really just check they have the removable baffles fitted or they are loud but nowhere as offensive as a loud multi pipes howling or even a T500 with spannies
__________________
"The final measure of any rider's skill is the inverse ratio of his preferred Traveling Speed to the number of bad scars on his body." Song of the sausage creature
Nickj is offline   Reply With Quote
Old 09-08-2019, 05:12 PM   #8
tricky1962
Guest
 
Posts: n/a
Am I right in thinking these little plug in units that richen the mixture slightly help?

I'll search for that

After decades of full four finger braking under normal circumstances I know I'm going to have trouble with modern brakes (as it was I occassionally kangaroo'd to a halt at a junction on the test ride :-)), so I will need ABS and after all why not?
  Reply With Quote
Old 09-08-2019, 05:19 PM   #9
slob
.
 
slob's Avatar
 
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,733
there should be a neutral light! finding neutral usually gets easier as the clutch pack wears in, 1500miles is next to nothing.

many folk put a 14T front sprocket (15T stock) on which smooths things out down low, going +3 on the back is a better but more complex/expensive fix, so best left for when the stock C&S needs replacing. ecu remapping is popular to remove the ‘emissions dead-spot’

baffles/db killers should be an option on termis if you’re trying not to upset your neighbours
slob is offline   Reply With Quote
Old 09-08-2019, 05:23 PM   #10
slob
.
 
slob's Avatar
 
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,733
nick’s right about chain tension too.

lambda sensor eliminators are the plug in doo-hickeys that save getting a full exu remap
slob is offline   Reply With Quote
Old 09-08-2019, 06:01 PM   #11
Pedro
Ciao, come stai?
 
Pedro's Avatar
 
Join Date: Apr 2003
Location: Somewhere
Bike: Multiple Monsters
Posts: 4,158
Stock gearing will make low revs a pain - one tooth down on the front sprocket helps loads.

Termi’s fitted will benefit from a remapped ecu which will help overall running as well. If they’re too loud fit a db killer and use the revs!

Gearboxes need a positive foot! They can be notchy when new but do get better with miles. There should be a neutral light!
__________________
Monster 1200R!
KTM 990 SuperDuke
Pedro is offline   Reply With Quote
Old 09-08-2019, 06:13 PM   #12
Luddite
Registered User
 
Luddite's Avatar
 
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
Welcome aboard, tricky.

As others have said, the low speed running of the 796 and 1100 Evo does leave a bit to be desired. As well as the emissions gubbins, both the 796 and Evo have a light flywheel, which doesn't lend itself particularly well to town speeds.

There are lots of ways to improve this - have a look here for some ideas - http://www.ukmonster.co.uk/monster/s...ad.php?t=54450

As for the neutral light, it's not uncommon to have problems here. Luckily, with the 796, it's easier to access and replace the switch than with the older models, as the wiring plugs into the end of the switch rather than being soldered on, like the early Monsters.

There are plenty of threads here on the subject - try this for starters http://www.ukmonster.co.uk/monster/s...ad.php?t=56304
Luddite is offline   Reply With Quote
Old 09-08-2019, 06:15 PM   #13
tricky1962
Guest
 
Posts: n/a
Well thanks for all the comments chaps.

This was the first one I've ridden and it had done only 1500 miles in 7 years.

I will now look for something a bit older just to get the measure of what the effects age and tuning/chain adjustment have.

I have been fancying one for years and I'll be honest, I got off it thinking well if I had to I could cope but that is not what I was expecting. I shall continue the hunt!

Cheers
  Reply With Quote
Old 09-08-2019, 06:24 PM   #14
tricky1962
Guest
 
Posts: n/a
Cheers Luddite
We cross posted
I'll have a good read of your first thread.
The garage I test road the bike from were general bike dealers and clearly hadn't noticed the missing neutral light
So I need to get out on a sorted one
You lot have bolstered my spirits :-)
  Reply With Quote
Old 09-08-2019, 06:35 PM   #15
tricky1962
Guest
 
Posts: n/a
Oi NIckJ!

T500 on spannies - sorry but that is Mozart on two wheels
Alongside these Termi things obvs :-)
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:06 PM.

vBulletin Skins by vBmode.com. Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.