![]() |
Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact | ![]() |
![]() |
|
![]() |
![]() |
Registered
Members: 639 | Total Threads: 50,828 | Total Posts: 518,562 Currently Active Users: 1,041 (0 active members) Please welcome our newest member, JodyG219 |
![]() |
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Guest
Posts: n/a
|
Hoop Suspension rose joints
Are these special ones or standard M10?
M10 joints are about £8, where as Ducati want £50! |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
I got these ones - fitted perfectly mcgill motorsports on ebay
|
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
Yes but the Ducati ones are made by Schaublin in Switzerland - precision engineering!
McGill Motorsport on left - Schaublin on right (Like Don_Matese - I bought the McGill ones and they're ok) ![]() |
![]() |
![]() |
#4 | |
Guest
Posts: n/a
|
Quote:
well impressed with quality |
|
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
Brilliant! There is a bearing specialist near me. I will just take it down with me.
|
![]() |
![]() |
#6 |
No turn left unstoned
Join Date: Jun 2010
Location: leicester
Bike: M750
Posts: 4,546
|
See my previous thread "squeaky rose joints" for more info.
I'm told that you can get teflon lined ones, which might be a good move. |
![]() |
![]() |
![]() |
#7 |
Guest
Posts: n/a
|
|
![]() |
![]() |
#8 |
Guest
Posts: n/a
|
Ok, so new rose joints fitted!
|
![]() |
![]() |
#9 |
Guest
Posts: n/a
|
Mine have a little grease nipple!
|
![]() |
![]() |
#10 |
Guest
Posts: n/a
|
So do mine, but I've never seen a grease gun that small. Or at least I don't have one.
|
![]() |
![]() |
#11 |
1/2 man - 1/2 pogo-stick
Join Date: Aug 2002
Location: Dartford, Kent
Bike: M900ie
Posts: 7,241
|
http://www.ukmonster.co.uk/monster/a...p/t-44397.html
http://www.autoexpress.co.uk/mini/30091/mini-grease-gun http://www.amazon.co.uk/Laser-3999-G.../dp/B002TVIZVE
__________________
![]() Fully paid up member of the S.A.S. (Scottoiler Appreciation Society) 27,000 miles on original chain - and still going strong! |
![]() |
![]() |
![]() |
#12 |
Guest
Posts: n/a
|
Thanks for your help with this guys, ordered mine from McGills, both were right hand thread (97 Monster).
Put the rear wheel in a paddock stand, and used a car jack under the engine to bushes out, went like a dream. |
![]() |
![]() |
#13 |
Guest
Posts: n/a
|
Can you get longer ones to raise the height of the rear of the bike?
|
![]() |
![]() |
#14 |
Guest
Posts: n/a
|
No, but Lougi Motorsport sell a jack up kit on eBay. Basically threaded spacers that fit between the hoop and the rose joints.
|
![]() |
![]() |
#15 |
Guest
Posts: n/a
|
|
![]() |
![]() |
|
|