rsrmoto_monster-titanium

Brake master seal kit??

Mr Gazza

Lord of the Rings
Joined
May 26, 2013
Messages
6,096
Location
Norwich
Bike
M900sie
I can't believe how hard this is turning out to be!

I'm looking for a seal/piston kit for a Brembo Gold line 16mm front brake master for y2000 M900ie.
I can't find anyone listing this! I've tied Moto Rapido who kindly suggested a KTM part could fit if I could ascertain compatibility.
Does anyone know a KTM year and model that uses Brembo 16mm Gold line?
Powerhouse also don't have the part.

I have done a superficial ebay search, but with no part numbers or accurate description I've had no reliable success.

Please can anyone help if you've cracked this one.
I'd be happy to buy a used, but known to be reliable master if anyone has a good spare?
Definitely not going to dismantle mine until I have the right kit in my hand, so identifying the parts by sight is tricky.

Thanks in advance folks. (y)
 
Thanks Tim. That's showing great potential.
Lots more master kits listed than I've seen anywhere else.
I'll see if I can properly identify the master and have a good look for numbers stamped on it, no way I'm taking it apart till I have the right bits in my hand.
They list a PR16 kit for much later models. I suspect the R means Radial?
Ironically I now my way round the coffin masters pretty well!
 
Addiction have a very interesting 16mm piston and seal kit, but it doesn't even specify front or rear fitment, so I'm non the wiser!
I spoke to the very helpful chappie in charge and he explained that even Brembo are not forthcoming with very much info about model compatibility echoing what Moto Rapido told me.
His advice was as stated on his website, to take the old one out and compare photos.
I find this very concerning as I could only get the piston out of the coffin masters by destroying the outer gaiter and a kind of snap ring thingy.
If there is a conventional circlip at the top I might be in business, by my hands are full with other stuff right now.

Once again I'd be very grateful if anyone has sourced a Goldline front brake master seal kit and can point me in the right direction.
 
Last edited:
Was going to suggest Addiction MS but I just did a quick search on their website and could not find seal kit for PSC16 but it looks like they have only the microswitch listed. Ducati Paddy would be my other suggestion but if you already spoke with him idk. When I tried ebay it came up with some KTM parts but I wouldn't know if they are correct ones.
 
Thanks Darren. You've given me PSC16 which I didn't know before, so I'm a bit further ahead.
If the KTM parts give a model application that's a help as I can search google images for that model and try to see what master it is.
I'll try a search for KTM seal kits. Do you have links by any chance?
 
Im not convinced this is the correct kit or not because it says 11.9mm but they list it also for the S4 the same kit.


I did some searching and on Ducati.ms forum Gotham cycles posted that the 16mm kits are no longer available from Brembo.
 
Back
Top