low level to high level

31-05-2004, 05:54 PM

Thinking about turning low level remus into high levels, in theory a case of getting 2 connector pipes made and a coupla brackets from the frame? at least then the footrest rangers can be cut in half! will scour mcn....I knpw jens "zorstec fella" comes reccomended and pd s had some bespoke things made (I think..) hmmm could look nice. any thoughts?
Alex.

Pedro · 31-05-2004, 09:19 PM

Yerbs

why don't yer hang both on one side like an S4R?

Ped

31-05-2004, 09:41 PM

may be a weight balance issue there ped! Ive emailed zortec so well see. Should be a link hack and a bent link pipe me or have 2 bits attached to the cut off link or or or

31-05-2004, 11:24 PM

Quote:

Originally Posted by Pedro

Yerbs

why don't yer hang both on one side like an S4R?

Because(and to quote Andy @ Zorstec when commenting on that four pipe monstrosity that cropped up last summer) that would look: "****e"...

BTW. Yerbs - if you get a price from Andy, please let Sazza J know because she is thinking of doing the same thing with her Carbon Can cans...

xxx

01-06-2004, 05:48 PM

Ill keep you all informed, just going to see if he s had time to reply to email. they quote up to 95 for link pipes........really just cant wait to take an angle grinder to the hangers! hmmm, nice duke (tm) tubes then all squares and triangles at the back?!
Alex

31-05-2004, 05:54 PM	#1
A Yerbury Guest Posts: n/a	low level to high level Thinking about turning low level remus into high levels, in theory a case of getting 2 connector pipes made and a coupla brackets from the frame? at least then the footrest rangers can be cut in half! will scour mcn....I knpw jens "zorstec fella" comes reccomended and pd s had some bespoke things made (I think..) hmmm could look nice. any thoughts? Alex.

31-05-2004, 09:19 PM	#2
Pedro Ciao, come stai? Join Date: Apr 2003 Location: Somewhere Bike: Multiple Monsters Posts: 4,157	Yerbs why don't yer hang both on one side like an S4R? Ped __________________ M900 - 1993! Monster 1200R!

31-05-2004, 09:41 PM	#3
A Yerbury Guest Posts: n/a	may be a weight balance issue there ped! Ive emailed zortec so well see. Should be a link hack and a bent link pipe me or have 2 bits attached to the cut off link or or or

01-06-2004, 05:48 PM	#5
A Yerbury Guest Posts: n/a	Ill keep you all informed, just going to see if he s had time to reply to email. they quote up to 95 for link pipes........really just cant wait to take an angle grinder to the hangers! hmmm, nice duke (tm) tubes then all squares and triangles at the back?! Alex