Aluminium Swingarms

Nasher · 05-09-2021, 10:08 PM

As mentioned elsewhere I've committed to a project that's going to be a little more draining on my project pot than what I've previously been used to, so I'm selling off a load of parts I've been hanging on to in case I build another early style Monster.

I'll be putting more parts up over the coming days, but first off I've got three, yes 3, M900 and 851 Aluminium swingarms.

I believe Nos. 1 & 2 are M900, and No. 3 is 851.
But apart from the mudguard mounts they are interchangeable.

All of them have been well used and have marks and general wear and tear.

But none of them are damaged beyond being useable or cracked.

All will clean up nicely and with a polish and re-anodize would look geat.
I was actually going to have them Vapour Blasted and then clear lacquer them.

There is also 1 rear wheel spindle with adjuster blocks plus brand new adjuster plates and nuts.

Looking at Ebay prices the Swingarms are £175 each collected from Clanfield Hants, or posted at an additional £10 each within mainland UK only.

The spindle etc is £25, plus £5 postage.

Please be aware however that if you require postage it may take me a few days to get them packaged up and off to you.

Nasher.

Darkness · 06-09-2021, 06:13 AM

No. 3 is ‘93 and ‘94 M900 standard specification too: the hugger fixings changed when they changed to the more curvy shaped one.

Good luck with sales!

Nasher · 06-09-2021, 07:59 AM

Thanks Darkness.

I'm open to offers by the way.

Nasher.

Nasher · 12-09-2021, 06:22 PM

Bumpty Bump.

I'm open to offers on these.

Nasher · 01-11-2021, 08:59 AM

Bumpty bump.

Still got a couple of these.

Nasher · 04-04-2022, 09:17 AM

Bumping again

Nasher · 05-08-2022, 07:27 PM

Still got these.

05-09-2021, 10:08 PM	#1
Nasher Registered User Join Date: Jul 2014 Location: Portsmouth Bike: M900 Posts: 1,510	M900 851 888 Aluminium Swingarms As mentioned elsewhere I've committed to a project that's going to be a little more draining on my project pot than what I've previously been used to, so I'm selling off a load of parts I've been hanging on to in case I build another early style Monster. I'll be putting more parts up over the coming days, but first off I've got three, yes 3, M900 and 851 Aluminium swingarms. I believe Nos. 1 & 2 are M900, and No. 3 is 851. But apart from the mudguard mounts they are interchangeable. All of them have been well used and have marks and general wear and tear. But none of them are damaged beyond being useable or cracked. All will clean up nicely and with a polish and re-anodize would look geat. I was actually going to have them Vapour Blasted and then clear lacquer them. There is also 1 rear wheel spindle with adjuster blocks plus brand new adjuster plates and nuts. Looking at Ebay prices the Swingarms are £175 each collected from Clanfield Hants, or posted at an additional £10 each within mainland UK only. The spindle etc is £25, plus £5 postage. Please be aware however that if you require postage it may take me a few days to get them packaged up and off to you. Nasher. __________________ Heaven doesn't want me, and Hell is afraid I'll take over. Last edited by Nasher; 10-11-2021 at 09:14 AM..

06-09-2021, 06:13 AM	#2
Darkness . Join Date: May 2007 Location: Stockbridge Bike: M900 Posts: 1,984	No. 3 is ‘93 and ‘94 M900 standard specification too: the hugger fixings changed when they changed to the more curvy shaped one. Good luck with sales! __________________ Original and Best since 1993

06-09-2021, 07:59 AM	#3
Nasher Registered User Join Date: Jul 2014 Location: Portsmouth Bike: M900 Posts: 1,510	Thanks Darkness. I'm open to offers by the way. Nasher. __________________ Heaven doesn't want me, and Hell is afraid I'll take over.

12-09-2021, 06:22 PM	#4
Nasher Registered User Join Date: Jul 2014 Location: Portsmouth Bike: M900 Posts: 1,510	Bumpty Bump. I'm open to offers on these. __________________ Heaven doesn't want me, and Hell is afraid I'll take over.

01-11-2021, 08:59 AM	#5
Nasher Registered User Join Date: Jul 2014 Location: Portsmouth Bike: M900 Posts: 1,510	Bumpty bump. Still got a couple of these. __________________ Heaven doesn't want me, and Hell is afraid I'll take over.

04-04-2022, 09:17 AM	#6
Nasher Registered User Join Date: Jul 2014 Location: Portsmouth Bike: M900 Posts: 1,510	Bumping again __________________ Heaven doesn't want me, and Hell is afraid I'll take over.

05-08-2022, 07:27 PM	#7
Nasher Registered User Join Date: Jul 2014 Location: Portsmouth Bike: M900 Posts: 1,510	Still got these. __________________ Heaven doesn't want me, and Hell is afraid I'll take over.