Broken wires in loom

[Tim88]

I have at last tracked down the cause of an intermittent fault on my right turn indicators. I had changed bulbs and cleaned the connector many times and the problem seemed to go away, but it was just coincidence. The real problem was fatigue fractures of the wires in the loom just behind the frame head stock. I peeled back the wrapping and found that the indicator wires were fractured, that is the white/green stripe and black/yellow stripe wires. I will try and solder them and heat shrink. My bigger problem is the crack, that is just about to part, iùn one of the two yellow/blue stripe wires that form the big black cable visible in the bundle at the top. I don't know what these are and the repair will be very tricky I fear. Loom repairs are horrible and I refuse to even consider bodge up crimping solutions. Not
looking
forward to this job but MoT due next week so have to get on with it. Any tips?[/IMG]