Brake switch pin.

[Mr Gazza]

Not realising that it is kept in place by the switch, I have removed the switch and lost the teensy little pin/button/pushrod that pushes the microswitch button on the Brembo coffin type brake master.

If anyone has a spare one I would be very eager to buy it.

Having only seen it from the lever end, I am assuming it is plastic and about 10mm long by 4mm diameter.

This might be another part to have 3D printed? We had a brilliant team effort with the speedo trip re-winder and now thanks to Dukedesmo and Slob ,the STL file of that item is freely available to anyone to have printed.

You can read the story here. http://www.ukmonster.co.uk/monster/s...ip+knob&page=4
If you look at post #57 and click on "STL file" you can see the 3D model of the part and even rotate it in all directions with your mouse.... Great fun!

Hoping someone can help me with the brake switch part..