JP Diag Siemens M3C ECU

SteveM900 · 22-01-2015, 07:44 PM

For those that are not aware the genius of a chap, JP now has the Siemens M3C ECU (i.e. 696, 796, 1100) covered in his diagnostic software !

Join his now resurrected forum for all the info. Basically you need a ELM327 diagnostic lead (widely available on tinternet) and a DDA lead available from Lonelec.

I have connected to my M1100 and am just waiting for my free licence to be able to fully exploit the programme.

Hats off to JP, I really admire people with the ingenuity to come up with stuff like this for the use of us mere mortals. Although free to use, a donation would be most appropriate.

jonzi · 22-01-2015, 07:52 PM

Where are these forums you speak of?

SteveM900 · 22-01-2015, 08:01 PM

The website address is .....http://jpdiag.xooit.eu/index.php That should take you there.

Copy and paste into google if you can't locate it. It contains a mix of French/English.

Dirty · 22-01-2015, 09:04 PM

Ah c'est tres bon

damien666 · 22-01-2015, 09:53 PM

I was reading the JP diag thing was no more the other month, so got the centurion diagnostics kit from www.technoresearch.com instead.
Sods law the JP site has been ressurected! Bugger!

23-01-2015, 07:03 AM

Cable ordered

I miss TuneEcu on my KTM's

SteveM900 · 23-01-2015, 12:52 PM

JP Diag was always available all be it in Guzzidiag form. You could use it on Ducati's as long as you found a Guzzi with the same version of ECU.
I have been keeping an eye on JP's progress with the Siemens ECU and he reported in December he would have it sorted soon, and hey presto he has!

Yes I used Tuneecu, another brilliant programme for KTM, Triumph and some Aprilias. You could also delete O2 sensors, SAS etc to suit pipe, filter etc changes and remap your own bike.

26-01-2015, 08:43 AM

Hi Steve

Received my Lonelec package today and it has 3 pin plug not DDA lead

I cannot find the DDA lead on their website (Is it the Multistrada lead they cleverly show so you cannot see it's configuration) ?

SteveM900 · 26-01-2015, 04:23 PM

Yes its the Multistrada one.http://www.lonelec.co.uk/bmz_cache/f...ge.225x180.jpg

27-01-2015, 07:37 AM

Thanks Steve

I asked the lonelec guy to make the cable picture show the plug and he said he will get it done

Ordered

jonzi · 24-05-2015, 07:45 PM

Right bumping this thread with a question

I bought this and already had this

I have tried all of the cable configs in the JPdiag application but can't get it to see my cable.

I have installed the drivers from here but I am getting nothing.

Any pro tips from you users please?

26-05-2015, 06:26 AM

Hi Jonzi

it needs an ELM327 interface

won't work with normal Vagcom type cables (same as tuneecu)

Rick

jonzi · 26-05-2015, 10:20 AM

Ah poop.

Ordered the EML327 instead.

Cheers

27-05-2015, 07:04 AM

I did the same initially ��

Rick

22-01-2015, 07:44 PM	#1
SteveM900 Registered User Join Date: Feb 2014 Location: Saltash Bike: Multiple Monsters Posts: 61	JP Diag Siemens M3C ECU For those that are not aware the genius of a chap, JP now has the Siemens M3C ECU (i.e. 696, 796, 1100) covered in his diagnostic software ! Join his now resurrected forum for all the info. Basically you need a ELM327 diagnostic lead (widely available on tinternet) and a DDA lead available from Lonelec. I have connected to my M1100 and am just waiting for my free licence to be able to fully exploit the programme. Hats off to JP, I really admire people with the ingenuity to come up with stuff like this for the use of us mere mortals. Although free to use, a donation would be most appropriate.

22-01-2015, 07:52 PM	#2
jonzi Mary Mary Quite Contrary Join Date: Mar 2012 Location: Berkhamsted Bike: M796 Posts: 1,398	Where are these forums you speak of? __________________ #48

22-01-2015, 09:04 PM	#4
Dirty Bockloks Join Date: Jan 2012 Location: London Bike: No Bike Yet! Posts: 4,601	Ah c'est tres bon __________________ Wounds heal, chicks dig scars, glory lasts forever Beware of eBay

24-05-2015, 07:45 PM	#11
jonzi Mary Mary Quite Contrary Join Date: Mar 2012 Location: Berkhamsted Bike: M796 Posts: 1,398	Right bumping this thread with a question I bought this and already had this I have tried all of the cable configs in the JPdiag application but can't get it to see my cable. I have installed the drivers from here but I am getting nothing. Any pro tips from you users please? __________________ #48

26-05-2015, 10:20 AM	#13
jonzi Mary Mary Quite Contrary Join Date: Mar 2012 Location: Berkhamsted Bike: M796 Posts: 1,398	Ah poop. Ordered the EML327 instead. Cheers __________________ #48

22-01-2015, 08:01 PM	#3
SteveM900 Registered User Join Date: Feb 2014 Location: Saltash Bike: Multiple Monsters Posts: 61	The website address is .....http://jpdiag.xooit.eu/index.php That should take you there. Copy and paste into google if you can't locate it. It contains a mix of French/English.

22-01-2015, 09:53 PM	#5
damien666 Registered User Join Date: Dec 2010 Location: Leeds, West-Yorks Bike: S4Rs Posts: 497	I was reading the JP diag thing was no more the other month, so got the centurion diagnostics kit from www.technoresearch.com instead. Sods law the JP site has been ressurected! Bugger!

23-01-2015, 07:03 AM	#6
Cobra88 Guest Posts: n/a	Cable ordered I miss TuneEcu on my KTM's

23-01-2015, 12:52 PM	#7
SteveM900 Registered User Join Date: Feb 2014 Location: Saltash Bike: Multiple Monsters Posts: 61	JP Diag was always available all be it in Guzzidiag form. You could use it on Ducati's as long as you found a Guzzi with the same version of ECU. I have been keeping an eye on JP's progress with the Siemens ECU and he reported in December he would have it sorted soon, and hey presto he has! Yes I used Tuneecu, another brilliant programme for KTM, Triumph and some Aprilias. You could also delete O2 sensors, SAS etc to suit pipe, filter etc changes and remap your own bike.

26-01-2015, 08:43 AM	#8
Cobra88 Guest Posts: n/a	Hi Steve Received my Lonelec package today and it has 3 pin plug not DDA lead I cannot find the DDA lead on their website (Is it the Multistrada lead they cleverly show so you cannot see it's configuration) ?

26-01-2015, 04:23 PM	#9
SteveM900 Registered User Join Date: Feb 2014 Location: Saltash Bike: Multiple Monsters Posts: 61	Yes its the Multistrada one.http://www.lonelec.co.uk/bmz_cache/f...ge.225x180.jpg

27-01-2015, 07:37 AM	#10
Cobra88 Guest Posts: n/a	Thanks Steve I asked the lonelec guy to make the cable picture show the plug and he said he will get it done Ordered

26-05-2015, 06:26 AM	#12
Cobra88 Guest Posts: n/a	Hi Jonzi it needs an ELM327 interface won't work with normal Vagcom type cables (same as tuneecu) Rick

27-05-2015, 07:04 AM	#14
Cobra88 Guest Posts: n/a	I did the same initially �� Rick