Single Sided Swing arm

30-11-2003, 10:28 AM

I'm sure I'm not the first to fantasise about this, but how difficult is it to transplant a single sided swing arm from a 748/916 onto a Monster?

Is there a Single Sided swing Arm conversion for Dummies thread anywhere?

30-11-2003, 11:41 AM

PM grunter he has donne his but you will need some engineering work done the bloke who done grunts (Viv) has done quite a few and they look the nuts he also lives in oxfordshire which may be handy.
Good luck.

grunter · 02-12-2003, 07:02 PM

pronto not hard to do just depends on how far you want to go?

engine change 916/748/996
if you want to keep your engine the casings need to be machined
and frame mods
etc etc
on and on
Viv is doing a monster with 748 engine this week in burnham go take a look? not far from oxford 01628668927
next to pdq marshgate industrail est
taplow
yours
grunt

Albie · 28-12-2003, 09:14 PM

I'm glad to here that a 748 is being used in a monster .I'm surprised the factory haven't picked up like the s4 especially with the new emissions on air cooled units.
Maybe you could keep us posted with pics and costings

Albie .gillingham kent

grunter · 28-12-2003, 10:19 PM

now a 916 engine , but a 748sps in production at the moment
check out www.ukmonster.20m.com
for pics etc

grunter · 06-01-2004, 08:54 AM

with yank bit

30-11-2003, 10:28 AM	#1
Guest Posts: n/a	Single Sided Swing arm I'm sure I'm not the first to fantasise about this, but how difficult is it to transplant a single sided swing arm from a 748/916 onto a Monster? Is there a Single Sided swing Arm conversion for Dummies thread anywhere?

02-12-2003, 07:02 PM	#3
grunter Administrator Join Date: Aug 2002 Location: burnham,bucks Bike: Other Ducati Posts: 680	sss arm pronto not hard to do just depends on how far you want to go? engine change 916/748/996 if you want to keep your engine the casings need to be machined and frame mods etc etc on and on Viv is doing a monster with 748 engine this week in burnham go take a look? not far from oxford 01628668927 next to pdq marshgate industrail est taplow yours grunt

28-12-2003, 09:14 PM	#4
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,030	I'm glad to here that a 748 is being used in a monster .I'm surprised the factory haven't picked up like the s4 especially with the new emissions on air cooled units. Maybe you could keep us posted with pics and costings Albie .gillingham kent __________________ http://albies93m900.blogspot.co.uk/

28-12-2003, 10:19 PM	#5
grunter Administrator Join Date: Aug 2002 Location: burnham,bucks Bike: Other Ducati Posts: 680	mod update now a 916 engine , but a 748sps in production at the moment check out www.ukmonster.20m.com for pics etc

06-01-2004, 08:54 AM	#6
grunter Administrator Join Date: Aug 2002 Location: burnham,bucks Bike: Other Ducati Posts: 680	pics with yank bit

30-11-2003, 11:41 AM	#2
fatbloke Guest Posts: n/a	PM grunter he has donne his but you will need some engineering work done the bloke who done grunts (Viv) has done quite a few and they look the nuts he also lives in oxfordshire which may be handy. Good luck.