How do I 'test' my wireless router?

bigredduke · 10-01-2010, 01:22 PM

My wireless router will not connect to the internet. After I connect the power, all the lights come on including the one which shows it has connected to the telephone line. The one that shows internet connection which usually comes on a few seconds after the telephone line connects is not functioning. I replaced the router with my original adsl speedtouch modem & I can connect.

Is there a definitive test which will show if the router is buggered & needs replacing? Being a Yorkshireman, I don't want to get another if my present one can be 'fixed'!
It is a Belkin adsl modem with wireless G router if that helps.
Thanks

Stafford · 10-01-2010, 01:28 PM

The obvious answer is try another router, which you've done and answered your own question Paul. Mine did the same last year with the same symptoms. I did get the provider to check their end, but in the end I got a spare from work and hey presto.

LVC · 10-01-2010, 01:36 PM

In the admin panel on the router (access via your browser ip address http://192.168.1.1/ - username and password are often "admin" but check your book to make sure) you can test the ADSL line connection - it will tell you if the Router has an issue or not.

Nickj · 10-01-2010, 07:16 PM

So as above go into the router control panel. If you can't get in to it with a password problem there will be a re-set on the back probably like the emergenct eject holes on CD drives.
So first you aren't getting a wireless signal? I assume that the PC (a) has got wireless, and (b) it is switched on !!
Check in control panel devices to see the driver is loaded for the wireless and the device is enabled. It might be worth updating anyway. When you've done that does anything happen?
In the router controls make sure the wireless is on and the channel set matches the PC setting.

The Belin default address for wireless routers is frequently 192.168.2.1 but can be 192.168.0.1 or 192.168.0.2

Oh and remove any really thick walls between you and the router!! Having said that mines working OK a floor below me and the other side of a 2 foot thick stone wall.

bigredduke · 10-01-2010, 07:20 PM

It's not that I can't pick up a signal from the router, the router itself won't connect to the internet in the first place.

LVC · 10-01-2010, 07:28 PM

Run the router diagnostic tests (admin panel) - it'll tell you if it can find the adsl line or not.

Check also your ADSL username and password are correct within settings on the Belkin and very the ports and connection type are correct also - they got jumbled on my Belkin once and had to reset everything then it was fine. If they're wrong then it'll give the same unconnectivity as if it can't find the ADSL line.

Nickj · 11-01-2010, 10:28 AM

Once you get into the web page for the router you want to go to the page for configuration, it will probably open in this anyway.
You can have multiple connections set up on most so first select index 1.
Give the connection a name
Now set the VPI and VCC (details from your ISP but 0, 38are common for PPPoA LLC)
Now set the ENCAPSULATION protocol, over copper it's probably going to be PPPoA LLC
All you ought to need to do now is to set your user name, often your isp assigned mail address and your password.
If you have a fixed IP then add this and select FIXED IP, you've probably got a dynamic address though.
Save this
If it's going to work it should now.

After this you can set up secure(ish) wireless access, NAT's, DMZ, port forwarding and any other odds and ends you need.

Stafford · 11-01-2010, 10:34 AM

I reckon it's just fecked.

bigredduke · 13-01-2010, 08:47 AM

Quote:

Originally Posted by Stafford

I reckon it's just fecked.

Todays prize for being a clever sod goes to..............Stafford. Yes it was terminally sick.
On the advice of the teccies at work I got a netgear router and although it wasn't quite as simple to install as they had me believe I managed to get it up and running eventually. Thanks for all your help guys.
Anyone want to buy a used Belkin router? Don't all rush at once.

10-01-2010, 01:22 PM	#1
bigredduke Nothing to see here Join Date: May 2005 Location: brough Bike: M1100evo Posts: 1,546	How do I 'test' my wireless router? My wireless router will not connect to the internet. After I connect the power, all the lights come on including the one which shows it has connected to the telephone line. The one that shows internet connection which usually comes on a few seconds after the telephone line connects is not functioning. I replaced the router with my original adsl speedtouch modem & I can connect. Is there a definitive test which will show if the router is buggered & needs replacing? Being a Yorkshireman, I don't want to get another if my present one can be 'fixed'! It is a Belkin adsl modem with wireless G router if that helps. Thanks

10-01-2010, 01:28 PM	#2
Stafford P3, nice. Join Date: Jun 2006 Location: Calne Bike: S2r 1000 Posts: 2,145	The obvious answer is try another router, which you've done and answered your own question Paul. Mine did the same last year with the same symptoms. I did get the provider to check their end, but in the end I got a spare from work and hey presto. __________________ celeres-racing.blogspot.co.uk/ The probability of survival is equal to the angle of arrival.

10-01-2010, 01:36 PM	#3
LVC The Loire Valley Monster Join Date: May 2006 Location: South of Le Mans Bike: S4 Posts: 709	In the admin panel on the router (access via your browser ip address http://192.168.1.1/ - username and password are often "admin" but check your book to make sure) you can test the ADSL line connection - it will tell you if the Router has an issue or not. __________________ *Kiss French, Play Japanese, Ride Italian....*

10-01-2010, 07:16 PM	#4
Nickj Too much time on my hands member Join Date: Jun 2007 Location: Forest Of Dean Bike: S2r Posts: 3,195	So as above go into the router control panel. If you can't get in to it with a password problem there will be a re-set on the back probably like the emergenct eject holes on CD drives. So first you aren't getting a wireless signal? I assume that the PC (a) has got wireless, and (b) it is switched on !! Check in control panel devices to see the driver is loaded for the wireless and the device is enabled. It might be worth updating anyway. When you've done that does anything happen? In the router controls make sure the wireless is on and the channel set matches the PC setting. The Belin default address for wireless routers is frequently 192.168.2.1 but can be 192.168.0.1 or 192.168.0.2 Oh and remove any really thick walls between you and the router!! Having said that mines working OK a floor below me and the other side of a 2 foot thick stone wall. __________________ "The final measure of any rider's skill is the inverse ratio of his preferred Traveling Speed to the number of bad scars on his body." Song of the sausage creature

10-01-2010, 07:28 PM	#6
LVC The Loire Valley Monster Join Date: May 2006 Location: South of Le Mans Bike: S4 Posts: 709	Run the router diagnostic tests (admin panel) - it'll tell you if it can find the adsl line or not. Check also your ADSL username and password are correct within settings on the Belkin and very the ports and connection type are correct also - they got jumbled on my Belkin once and had to reset everything then it was fine. If they're wrong then it'll give the same unconnectivity as if it can't find the ADSL line. __________________ *Kiss French, Play Japanese, Ride Italian....* Last edited by LVC; 10-01-2010 at 07:32 PM..

10-01-2010, 07:20 PM	#5
bigredduke Nothing to see here Join Date: May 2005 Location: brough Bike: M1100evo Posts: 1,546	It's not that I can't pick up a signal from the router, the router itself won't connect to the internet in the first place.

11-01-2010, 10:28 AM	#7
Nickj Too much time on my hands member Join Date: Jun 2007 Location: Forest Of Dean Bike: S2r Posts: 3,195	Once you get into the web page for the router you want to go to the page for configuration, it will probably open in this anyway. You can have multiple connections set up on most so first select index 1. Give the connection a name Now set the VPI and VCC (details from your ISP but 0, 38are common for PPPoA LLC) Now set the ENCAPSULATION protocol, over copper it's probably going to be PPPoA LLC All you ought to need to do now is to set your user name, often your isp assigned mail address and your password. If you have a fixed IP then add this and select FIXED IP, you've probably got a dynamic address though. Save this If it's going to work it should now. After this you can set up secure(ish) wireless access, NAT's, DMZ, port forwarding and any other odds and ends you need. __________________ "The final measure of any rider's skill is the inverse ratio of his preferred Traveling Speed to the number of bad scars on his body." Song of the sausage creature

11-01-2010, 10:34 AM	#8
Stafford P3, nice. Join Date: Jun 2006 Location: Calne Bike: S2r 1000 Posts: 2,145	I reckon it's just fecked. __________________ celeres-racing.blogspot.co.uk/ The probability of survival is equal to the angle of arrival.