Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 599 | Total Threads: 50,784 | Total Posts: 518,186 Currently Active Users: 288 (0 active members) Please welcome our newest member, Fat8ird11 |
|
|
Thread Tools | Display Modes |
01-03-2008, 05:11 PM | #1 |
Guest
Posts: n/a
|
DP Bikini Fairing Fitting Advice
Need some advice fitting a carbon fibre DP fairing, would anyone have details of how to fit this to a 600 dark carb 2000 facelift model. checked the ducati accessories catalogue & it seem to reference my bike - any photos would be appreciated..
Many thanks Mart |
01-03-2008, 05:27 PM | #2 |
.
Join Date: May 2007
Location: Stockbridge
Bike: M900
Posts: 1,984
|
Hi
I fitted one to a '93 m900 as follows: 1. Take the upper top clamp bolt out of top yoke on each side. 2. Use the longer bolts and spacers [Suplied in kit] to fix the flattened ends of the alloy rods to the top yoke, with the rods pointing forwards. 3. Push the rubber top hat insert/nuts into the ends of the rods. 4. Slacken off the headlamp mounting bolts and slide in the slotted leg of the L shape brackets [Supplied in kit]. 5. Push a rubber top hat insert/nut through the hole in each L bracket. 6. Offer up the carbon fibre to the fixings: bottom ones to the L brackets and upper ones to the rods. 7. Check headlight alignment and fettle, then tighten up all bolts. 8. Fit screen. Hope this helps? Mark
__________________
Original and Best since 1993 |
01-03-2008, 05:34 PM | #3 |
Guest
Posts: n/a
|
Mark,
Thanks for the quick reply, will give it a try tomorrow morning... Regards Mart |
Thread Tools | |
Display Modes | |
|
|