Exhaust Help?

boris · 05-05-2005, 08:19 AM

Looking at changing the stock cans for something more exotic (louder). Mooching around various manufacturers sites I've hardly spotted anything that has a 620ie compatability. Can any of you bods advise me whether those typed to other Monsters will fit my wee gem?

05-05-2005, 11:13 AM

Anything for a post 00/01 bike should physically fit (earlier bikes had a different connector to the rest of the system under the footpegs - basically you need one that will slip into the exisiting system, not clamp around like the older bikes - I think the later system is 48mm or maybe 50mm ID - you need to check (take a can off and measure x)

The EFi is almost certain to compensate for a change of can (the later bikes tend to run a touch rich from the factory anyway), only if you change the airbox and filer might you need to have the EFi adjusted...

If you speak to Stu at Spareshack, he can tell you which systems will fit...

xxx

PS. I think Natty boy had a low level Temi set (brand new) at a good price too...

NattyBoy · 05-05-2005, 02:32 PM

Sent PM Boris !

Nat

05-05-2005, 05:07 PM

I too had been looking for a louder exhaust for my 620 ie .
After seing some on EBAY I contacted stuart at spareshack and he sorted me out with a nice set of high level exhausts for just over Â£300.They fitted on a bit of **** after you decifer where all the nuts bolts spacers washers etc etc go.
Touch wood I ve had no problems so far and she runs like a dream.

His Email address is stuart@spareshack.com

05-05-2005, 08:24 PM

I got Leo Vince high level oval carbon cans for my 620ie - specifically sold for the 620. They fit well, look great and sound even better

The bike runs better as well... Not sure the neighbours would agree they sound better mind

However, I think they have stopped making them as they are no longer listed on their website, but might be worth trawling the net to see if someone has a set left somewhere. I got mine from Busters for 275 delivered earlier in the year. Think it was my lucky day...

If you are interested I'll get the product number off the box when it's daylight (garage light doesn't work) as it might help a search.

Cheers,

Pete

boris · 07-05-2005, 10:27 AM

Thanks for all your advice so far. Only need to sort out the Finance Manager(wife) and I'll be on to it......

boris · 08-05-2005, 07:50 PM

NattyBoy, I've sent you a couple of PMs (don't know if your box is full?). Good news is, I've got a result!!

NattyBoy · 08-05-2005, 07:51 PM

Just picked them up mate...been out..sorry ! Will bell you tommorrow

Nat

05-05-2005, 08:19 AM	#1
boris More Tools! Join Date: Jun 2004 Location: Forres Bike: Multiple Monsters Posts: 296	Exhaust Help? Looking at changing the stock cans for something more exotic (louder). Mooching around various manufacturers sites I've hardly spotted anything that has a 620ie compatability. Can any of you bods advise me whether those typed to other Monsters will fit my wee gem? __________________ Boris from Forres

07-05-2005, 10:27 AM	#6
boris More Tools! Join Date: Jun 2004 Location: Forres Bike: Multiple Monsters Posts: 296	Exhaust Help Thanks for all your advice so far. Only need to sort out the Finance Manager(wife) and I'll be on to it...... __________________ Boris from Forres

08-05-2005, 07:50 PM	#7
boris More Tools! Join Date: Jun 2004 Location: Forres Bike: Multiple Monsters Posts: 296	Result! NattyBoy, I've sent you a couple of PMs (don't know if your box is full?). Good news is, I've got a result!! __________________ Boris from Forres

05-05-2005, 11:13 AM	#2
JMo Guest Posts: n/a	Anything for a post 00/01 bike should physically fit (earlier bikes had a different connector to the rest of the system under the footpegs - basically you need one that will slip into the exisiting system, not clamp around like the older bikes - I think the later system is 48mm or maybe 50mm ID - you need to check (take a can off and measure x) The EFi is almost certain to compensate for a change of can (the later bikes tend to run a touch rich from the factory anyway), only if you change the airbox and filer might you need to have the EFi adjusted... If you speak to Stu at Spareshack, he can tell you which systems will fit... xxx PS. I think Natty boy had a low level Temi set (brand new) at a good price too...

05-05-2005, 02:32 PM	#3
NattyBoy Monsterless again for now Join Date: Sep 2002 Location: Wiltshire Bike: M900 Posts: 3,189	Sent PM Boris ! Nat

05-05-2005, 05:07 PM	#4
russell Guest Posts: n/a	I too had been looking for a louder exhaust for my 620 ie . After seing some on EBAY I contacted stuart at spareshack and he sorted me out with a nice set of high level exhausts for just over Â£300.They fitted on a bit of **** after you decifer where all the nuts bolts spacers washers etc etc go. Touch wood I ve had no problems so far and she runs like a dream. His Email address is stuart@spareshack.com

05-05-2005, 08:24 PM	#5
pete Guest Posts: n/a	I got Leo Vince high level oval carbon cans for my 620ie - specifically sold for the 620. They fit well, look great and sound even better The bike runs better as well... Not sure the neighbours would agree they sound better mind However, I think they have stopped making them as they are no longer listed on their website, but might be worth trawling the net to see if someone has a set left somewhere. I got mine from Busters for 275 delivered earlier in the year. Think it was my lucky day... If you are interested I'll get the product number off the box when it's daylight (garage light doesn't work) as it might help a search. Cheers, Pete

08-05-2005, 07:51 PM	#8
NattyBoy Monsterless again for now Join Date: Sep 2002 Location: Wiltshire Bike: M900 Posts: 3,189	Just picked them up mate...been out..sorry ! Will bell you tommorrow Nat