Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 600 | Total Threads: 50,787 | Total Posts: 518,232 Currently Active Users: 353 (0 active members) Please welcome our newest member, carthagho |
|
|
Thread Tools | Display Modes |
28-06-2018, 10:00 AM | #16 |
Guest
Posts: n/a
|
What's the easiest way to order the correct lines? M620 Single disc ones and ask for a radial banjo at the top? I assume they come with all the bits to fit?
Also which discs should I get? The most expensive thing seems to be the radial MC. I don't know of any secondhand ones so it's the RCS at £220 plus the reservoir and bits Last time when I went for the gold line swap I think I went ebc discs, standard MC and a brake line kit for an S4 or something |
28-06-2018, 10:32 AM | #17 |
Registered User
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
|
For brake lines you could give Venhill a ring for advice. They're very knowledgeable and helpful. https://www.venhill.co.uk/
Brembo recommend the RCS15 for a single-disc setup running a four-piston caliper. The m/c kit should come with a pressure switch for the brake light, so that'll be one less thing to buy! For the disc, I recently fitted a Brembo Serie Oro, which is better spec (and lighter) than stock and a bit below the fully floating race disc. When shopping around for Brembo parts, try Simon at WSC performance; he gave me a really good deal on my discs and pads. http://www.ukmonster.co.uk/monster/s...d.php?p=551847 Last edited by Luddite; 28-06-2018 at 10:35 AM.. |
29-06-2018, 07:15 PM | #18 |
Guest
Posts: n/a
|
Thanks Luddite I will check them out
The problem I thought of today is will having a Brembo RCS make me want a radial clutch MC just so things match.....(£££!!) |
29-06-2018, 08:25 PM | #19 | |
Registered User
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
|
Quote:
To make it easier for you, you'd need an RCS14 clutch master (assuming your current one is a PS13 - 13mm). Note that there's also an RCS14 brake m/c for the right hand bar so, if you order, make sure you get the right (i.e. left!) one. |
|
29-06-2018, 08:29 PM | #20 |
Guest
Posts: n/a
|
Haha two MC's for a single disc would be new!
|
29-06-2018, 09:35 PM | #21 |
Registered User
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
|
|
15-11-2018, 08:28 AM | #22 |
Guest
Posts: n/a
|
Do the 749/999 calipers require different offset rotors?
|
15-11-2018, 06:32 PM | #23 |
Guest
Posts: n/a
|
Anyone? So I know which disc to order (Brembo serie Oro)
|
15-11-2018, 07:15 PM | #24 |
Registered User
Join Date: Dec 2010
Location: Oslo
Bike: S2r
Posts: 426
|
|
15-11-2018, 07:52 PM | #25 |
Registered User
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
|
A straight swop 300mm Brembo is 78B40850 but, if you're upgrading to 320mm plus caliper, you'll need a 78B40870.
These discs are around £160 each from Carpimoto in Italy but try Simon at WSC performance; he gave me a really good deal on my discs and pads. http://www.ukmonster.co.uk/monster/s...d.php?p=551847 |
15-11-2018, 07:58 PM | #26 |
Guest
Posts: n/a
|
Awesome thanks guys!
78B40870 is 159 euros from Carpimoto. Accumulating parts bit by bit, eventually I'll be able to put the puzzle together haha |
16-11-2018, 09:38 AM | #27 |
Registered User
Join Date: Dec 2010
Location: Oslo
Bike: S2r
Posts: 426
|
You're not that far from a full floating rotor....... which is dramatically much better.
|
|
|