UK Monster Owners Club Forum » .: General :. » Random Chat » Cutting open an early monster tank advice

Reply
 
Thread Tools Display Modes
Old 12-01-2019, 07:19 PM   #1
Davy
Registered User
 
Davy's Avatar
 
Join Date: Aug 2007
Location: Derry
Bike: M900
Posts: 358
Cutting open an early monster tank advice

Ive a spare original early 900 monster tank which has been lined in the past, I’ve tried a few different methods/ solutions to clean it out but nothing works so far.. although I’ve been reading MEK will soften the lining enough to let me get it out. I will try that before I do anything else..
anyway would it could it work if I cut a large panel out of the underside to get at it and clean it out. Then get the panel I cut out welded or braised back in place.
I can’t seem to get my pics to load. I use postimage as before but for some reason it just won’t work .
Anyway is it crazy or doable?
__________________
1994 M900 Black
Davy is offline   Reply With Quote
Old 12-01-2019, 07:46 PM   #2
chris.p
Gold Member
 
chris.p's Avatar
 
Join Date: Mar 2004
Location: lincoln
Bike: No Bike Yet!
Posts: 876
Contact these guys for advice.

https://www.rust.co.uk/product/slosh...ol-tank-seal-7
chris.p is offline   Reply With Quote
Old 12-01-2019, 08:46 PM   #3
Davy
Registered User
 
Davy's Avatar
 
Join Date: Aug 2007
Location: Derry
Bike: M900
Posts: 358
Will call them regarding their AS10 to see if that will do my job instead of cutting it open. But with some of these chemicals the sellers won’t ship to Ireland.
Thanks I’ll keep you posted.
__________________
1994 M900 Black
Davy is offline   Reply With Quote
Old 12-01-2019, 10:17 PM   #4
Nickj
Too much time on my hands member
 
Nickj's Avatar
 
Join Date: Jun 2007
Location: Forest Of Dean
Bike: S2r
Posts: 3,187
Warm sulfuric acid works quite well with the slow cure, high strength epoxies which are what pretty much all the tank liners are.
Also worth considering are toluene, NMP (n-methly-pyrollidone) and MEK (methyl-ethyl-ketone) which are all fairly nasty chemicals and you want to do use them in a very well ventilated space.
Thermal shock also will work but you probably don't want to get the tank that hot and then quench it in cold water (usually needs a few cycles).
It will burn off but can need up to 400C and I've heard that you can use high temperature steam.
The tank will still need lining with something as the inevitable ethanol in fuel will cause water to accumulate in the base of the tank and eat through eventually.
__________________
"The final measure of any rider's skill is the inverse ratio of his preferred Traveling Speed to the number of bad scars on his body." Song of the sausage creature
Nickj is offline   Reply With Quote
Old 13-01-2019, 06:59 PM   #5
Davy
Registered User
 
Davy's Avatar
 
Join Date: Aug 2007
Location: Derry
Bike: M900
Posts: 358
A lot of food for thought there. Ok so il try and get my hands on some MEK first then take it from there.
BUT anyone any advice pros cons of cutting it open?
__________________
1994 M900 Black
Davy is offline   Reply With Quote
Old 13-01-2019, 10:10 PM   #6
Nickj
Too much time on my hands member
 
Nickj's Avatar
 
Join Date: Jun 2007
Location: Forest Of Dean
Bike: S2r
Posts: 3,187
Only that if you cut it you've got to shut it.
The only problem I can see is down to the shape of the tank, there isn't really a good place to make a decent sized hole to get access, and I'm not sure how helpful that would be given that the best removal is going to be by using liquid solvents.
If you do cut the tank make sure you have a welder who can do a decent job sticking it back together again.
__________________
"The final measure of any rider's skill is the inverse ratio of his preferred Traveling Speed to the number of bad scars on his body." Song of the sausage creature
Nickj is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT. The time now is 07:58 AM.

vBulletin Skins by vBmode.com. Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.