bearing problem

jerry · 23-03-2022, 07:43 AM

If anyone can remember i had a seized swing arm on my S4 but eventually we got the old pivot out 2 years ago now rebuilding the bike , now have fitted new ice cold bearings with heat lots of grease and a puller the seals are in and the circlips but sadly one of the new bearings there are 4 is not rolling smoothly,, whats the best way of getting it out for another new one , its an outer one which is fortnunate , I have various bearing pullers but they just wont catch the inner lip of the damn bearing going to get another bearing and seal , have a new pivot too,

also same problem on one of the new front wheel bearings pulled in ok but one of them is no good but its easy to knock out ,,

23-03-2022, 07:43 AM	#1
jerry Old Git Join Date: May 2006 Location: Cricklade Bike: Multiple Monsters Posts: 2,820	bearing problem If anyone can remember i had a seized swing arm on my S4 but eventually we got the old pivot out 2 years ago now rebuilding the bike , now have fitted new ice cold bearings with heat lots of grease and a puller the seals are in and the circlips but sadly one of the new bearings there are 4 is not rolling smoothly,, whats the best way of getting it out for another new one , its an outer one which is fortnunate , I have various bearing pullers but they just wont catch the inner lip of the damn bearing going to get another bearing and seal , have a new pivot too, also same problem on one of the new front wheel bearings pulled in ok but one of them is no good but its easy to knock out ,, __________________ MONSTERMAN