Gold billet aftermarket clutch slave

Darren69 · 17-02-2024, 11:26 PM

Brand new, never fitted. Comes with o ring, spacer, crush washers and stainless bolts.
Fits most bikes and models up to 2016.
£75 posted.

Mr Gazza · 18-02-2024, 12:45 PM

You'd think Gold would be too soft for a servo? And heavy!

Good value though. How many carrots?

Darren69 · 18-02-2024, 02:22 PM

Just a small bag from Asda.

Seriously though I said 2016 but idk what year they fitted the anti rotation pin to the pushrod so obviously it won't fit those bikes unless you were to switch out the pushrod also or grind them off, probably not a good idea tho tbh although I've had no issues with pushrod spinning on any of my bikes

Mr Gazza · 18-02-2024, 04:07 PM

Ah! Would you take a bag of carrots for it?

The anti spin pins just tap out, I think it's just a little roll pin?
The earlier non-pinned rods are shorter, which is why you need the spacer on those.
For a short period the longer rods were fitted without the pins. (about 2001-2002 time.)
All the pushrods are supplied with pins now and you just push them out if not required.

17-02-2024, 11:26 PM	#1
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,022	Gold billet aftermarket clutch slave Brand new, never fitted. Comes with o ring, spacer, crush washers and stainless bolts. Fits most bikes and models up to 2016. £75 posted. __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

18-02-2024, 12:45 PM	#2
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,805	You'd think Gold would be too soft for a servo? And heavy! Good value though. How many carrots? __________________

18-02-2024, 02:22 PM	#3
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,022	Just a small bag from Asda. Seriously though I said 2016 but idk what year they fitted the anti rotation pin to the pushrod so obviously it won't fit those bikes unless you were to switch out the pushrod also or grind them off, probably not a good idea tho tbh although I've had no issues with pushrod spinning on any of my bikes __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

18-02-2024, 04:07 PM	#4
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,805	Ah! Would you take a bag of carrots for it? The anti spin pins just tap out, I think it's just a little roll pin? The earlier non-pinned rods are shorter, which is why you need the spacer on those. For a short period the longer rods were fitted without the pins. (about 2001-2002 time.) All the pushrods are supplied with pins now and you just push them out if not required. __________________