Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 605 | Total Threads: 50,802 | Total Posts: 518,377 Currently Active Users: 314 (0 active members) Please welcome our newest member, ian66 |
|
|
Thread Tools | Rating: | Display Modes |
|
17-05-2016, 04:48 PM | #1 |
Guest
Posts: n/a
|
So today i sorted out the wiring for the indicators. It began with doing a continuity test which showed that there was nothing there, not a sausage! So i started to strip back the loom and it turns out the original owner hadn't finished hooking stuff up before wrapping the loom back up...
The green/white wires weren't attached from just after the loom plug so neither front/rear worked on the right where as the black/white for the left side was wired into the front one but not the rear so had to splice them together. I did solder eveything but my soldering isn't worth of pictures Waiting on diagnostic stuff arriving then it's time to get set in about it to get it running properly... |
|
|