Remapping ECU's

Bitza · 23-03-2018, 10:28 PM

Hi all, OK todays problem is who to go to, to get my S2R 1000 ecu remapped to suit my uprated S2R engine (98mm bore, High comp pistons, Vee-Two 300 cams, ported head, with free flow air filter & exhaust), coupled to my 1994 chassis in particular the 6 trigger set up for the electronic speedo sensor. I realise no off the peg map will perfectly suit my set up so was planning on piggy-backing a Power Commander III to give me final on-dyno adjustment. All thoughts/suggestions gratefully received, Bitza.

chris.p · 24-03-2018, 07:04 AM

Try this guy, not to far from you.

https://www.facebook.com/Track-Elect...5517720555815/

rollo22 · 24-03-2018, 07:09 AM

There is also BSD
Address:
BSD
12 a Green Road
Eye
Peterborough
PE6 7YR
Tel:+44 (0) 1733 223377Fax:+44 (0) 1733 223537

Maggsy · 24-03-2018, 08:48 AM

Neil at Cornerspeed is very knowledgeable and helpful.
He also does a postal service. You send him your ECU, he reflashes it and then returns it to you. Not expensive either.
http://cornerspeed.co.uk/

Capo · 24-03-2018, 12:29 PM

I doubt whether you will find a map to suit all those mods, it will have to go on the dyno, BSD for that.

Bitza · 24-03-2018, 09:29 PM

Thanks for the help & interest, Bitza

23-03-2018, 10:28 PM	#1
Bitza Bronze Member Join Date: Jul 2006 Location: Poole Bike: M900ie Posts: 470	Remapping ECU's Hi all, OK todays problem is who to go to, to get my S2R 1000 ecu remapped to suit my uprated S2R engine (98mm bore, High comp pistons, Vee-Two 300 cams, ported head, with free flow air filter & exhaust), coupled to my 1994 chassis in particular the 6 trigger set up for the electronic speedo sensor. I realise no off the peg map will perfectly suit my set up so was planning on piggy-backing a Power Commander III to give me final on-dyno adjustment. All thoughts/suggestions gratefully received, Bitza. __________________ Bitza

24-03-2018, 07:09 AM	#3
rollo22 Moderator Join Date: Apr 2008 Location: Moreton-in-Marsh Bike: M1100evo Posts: 1,082	There is also BSD Address: BSD 12 a Green Road Eye Peterborough PE6 7YR Tel:+44 (0) 1733 223377Fax:+44 (0) 1733 223537 __________________ IF ALL ELSE FAILS READ THE INSTRUCTIONS

24-03-2018, 08:48 AM	#4
Maggsy Registered User Join Date: Sep 2016 Location: Warminster Bike: M696 Posts: 170	Neil at Cornerspeed is very knowledgeable and helpful. He also does a postal service. You send him your ECU, he reflashes it and then returns it to you. Not expensive either. http://cornerspeed.co.uk/ __________________ What's that coming over the hill?

24-03-2018, 09:29 PM	#6
Bitza Bronze Member Join Date: Jul 2006 Location: Poole Bike: M900ie Posts: 470	Thanks for the help & interest, Bitza __________________ Bitza

24-03-2018, 07:04 AM	#2
chris.p Gold Member Join Date: Mar 2004 Location: lincoln Bike: No Bike Yet! Posts: 876	Try this guy, not to far from you. https://www.facebook.com/Track-Elect...5517720555815/

24-03-2018, 12:29 PM	#5
Capo You Are What You Is Join Date: May 2005 Location: A Foward Location Bike: S4r Posts: 1,948	I doubt whether you will find a map to suit all those mods, it will have to go on the dyno, BSD for that.