Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 600 | Total Threads: 50,787 | Total Posts: 518,232 Currently Active Users: 451 (0 active members) Please welcome our newest member, carthagho |
|
|
Thread Tools | Display Modes |
12-08-2022, 08:18 PM | #1 |
Lord of the Rings
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,801
|
Constands SSSA paddock stand
A good quality product, nicely made and finished. Strong double wheels made of metal. Speced for long term storage of a bike rather than the flimsier designs that don't recommend leaving the bike on the stand. Has been used on an S4R. The pin is 21.5mm dia for 61mm and steps up to 25.7mm for 34mm. Alternative pins are available from Constands. https://www.motea.com/en/catalogsear.../?q=stand+pins Stand now sold and on it's way to Scotland.
__________________
Last edited by Mr Gazza; 04-02-2023 at 02:09 PM.. |
27-12-2022, 11:00 AM | #2 |
Lord of the Rings
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,801
|
This is still available.
Fits S4R and S2R as is, but is convertible to any other bike with SSSA by changing the pin. Might consider a conventional swinging arm stand in exchange.
__________________
Last edited by Mr Gazza; 27-12-2022 at 05:33 PM.. |
27-12-2022, 04:01 PM | #3 |
Registered User
Join Date: Sep 2010
Location: Leics
Bike: M900
Posts: 2,842
|
if it helps anyone, this should also fit all 916 series bikes plus Hypermotard, Multistrada (old model) 848 etc. in short, any SSSA bike with the 'small' hub.
Of course, fit a larger pin and it should be good for the large hub bikes too.
__________________
M900, 916, LeMans II. |
22-01-2023, 06:14 PM | #4 |
Lord of the Rings
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,801
|
Just bought yet another paddock stand and I'm keen to get rid of this one.
Just to clarify that SSSA means Single Sided Swinging Arm in case anyone didn't know. Now prepared to let it go for £40 posted. Also keen to move these virtually new Barracuda B-Lux mirrors on, so now £40 posted. They are no more that 2 years old and have been used for a few hundred miles only. They look good as new to me. Both are M10 RH thread which should fit coffin and Goldline clamps with no adapter. If needed I have a clamp that might fit a vertically split coffin master. Just check that you don't have a LH thread on one side, I've yet to find one on a Ducati. Or you can buy new ones for only £160? https://www.ebay.co.uk/itm/284985505...Bk9SR6imvtCxYQ
__________________
|
|
|