Confused of Aylsham

dacs · 27-06-2022, 03:53 PM

I've just put a pair of ExactRep belts in my M1000Sie motor. The Cycle Works tutorial video shows the tension being set (they recommend 99hz, up to 110 Hz,) on the short run of the belt, that is between the fixed roller and the driving pulley. This Forum suggests (on the 1100 belts thread) that the tension should be set on the long run of the belt, i.e. between the fixed roller and the camshaft pulley. As there is a fairly hefty difference in the readings from the two methods, I need to bottom out where 99 Hz reading should apply, any help gratefully received - I'm using the Pano tuner app, by the way.

27-06-2022, 03:53 PM	#1
dacs Registered User Join Date: Dec 2014 Location: Aylsham Bike: Multiple Monsters Posts: 193	Confused of Aylsham I've just put a pair of ExactRep belts in my M1000Sie motor. The Cycle Works tutorial video shows the tension being set (they recommend 99hz, up to 110 Hz,) on the short run of the belt, that is between the fixed roller and the driving pulley. This Forum suggests (on the 1100 belts thread) that the tension should be set on the long run of the belt, i.e. between the fixed roller and the camshaft pulley. As there is a fairly hefty difference in the readings from the two methods, I need to bottom out where 99 Hz reading should apply, any help gratefully received - I'm using the Pano tuner app, by the way. __________________ NFN