UK Monster Owners Club Forum » Gallery » UKMOC Bikes » walpole68's Monster 1100S

Reply
 
Thread Tools Rate Thread Display Modes
Old 13-07-2009, 09:18 AM   #1
MON
Guest
 
Posts: n/a
I did put the manufacturer, part number and an idea of its location in B&Q on the "other" website if it's any help

I've got carried away this morning and gone for the complete german setup that Albie pointed me towards.

As for colour, you've got a photo of my silver mesh above and Abie's on another thread, which may help you make up your mind. Just make sure you buy ally mesh and not the steel one!

Pity you didn't make it over the Sharnbrook yesterday...

Last edited by MON; 13-07-2009 at 09:24 AM..
  Reply With Quote
Old 13-07-2009, 09:24 AM   #2
walpole68
Guest
 
Posts: n/a
Quote:
Originally Posted by MON View Post
I did put the manufacturer, part number and an idea of its location in B&Q on the "other" website if it's any help

I've got carried away this morning and gone for the complete german setup that Albie pointed me towards.

Pity you didn't make it over the Sharnbrook yesterday...

The side bits do look very nice,about time we had some updated photos of yours too.
Cant ride out at the moment as the exhaust is off,trying to get a mid pipe made to remove the flapper valve and tidy that section up.
  Reply With Quote
Old 13-07-2009, 09:42 AM   #3
MON
Guest
 
Posts: n/a
There will be an update soon as I have a multitude of bits and pieces on the way, but it'll probably be a couple of weeks yet.

There is a photo of it on the Sharnbrook thread, but not that close up.

Won't you have an issue with the stepper motor for the valve getting confused if you remove the valve? I thought the full system ECU was programmed slightly differently to the end can option, but I could be wrong.
  Reply With Quote
Old 13-07-2009, 09:57 AM   #4
walpole68
Guest
 
Posts: n/a
Quote:
Originally Posted by MON View Post
There will be an update soon as I have a multitude of bits and pieces on the way, but it'll probably be a couple of weeks yet.

There is a photo of it on the Sharnbrook thread, but not that close up.

Won't you have an issue with the stepper motor for the valve getting confused if you remove the valve? I thought the full system ECU was programmed slightly differently to the end can option, but I could be wrong.
The valve does not work with the cans ecu,is fully open as noise not a problem with race cans ! worst i could get is a fault code,might try unpluggin the servo under the seat and see what happens,the valve just looks horrible.
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 04:57 PM.

vBulletin Skins by vBmode.com. Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.