Ducati specific Stainless fasteners.

[Nasher]

As Photbucket completely ruined my last post on these I thought I’d start a new one and update it with some extra parts.

Over the last couple of years I’ve done a bit of work sourcing or making fasteners and can offer the following.

Early Monster Instrument cluster special bolts.
I machine these myself from a longer bolt, a few people have had them from me and been very happy.

From This:


Using these:


To this:


Or with standard instruments(Inc. my LED Rev Counter mod):


These are £12 a pair including postage, but I only get time to machine them at the weekend, so can’t send any out until the following Monday.

Brembo Master Cylinder Lever pivot sheet metal nuts.
The original mild steel version of these go rusty very quickly, these are in A2 Stainless steel and are a direct replacement.


£6 a pair including postage.

Lock stops
Again these go rusty very quickly, and Ducati appear to use 2 versions on everything from the 90s to almost the present day.

There is a 25mm version and a 30mm version used by Ducati, but the 30mm version s fits the earlier bikes that were originally fitted with the 25mm Version. Shown below fitted to my M900 below. I’ve also used them on my 900SS.
If needed I can cut them down to 25mm before sending, but can only do this at the weekends.

Again these are A2 Stainless steel and are a direct replacement.

Old scabby Steel


To be replaced with these


Like so


These are £6 a pair posted.

Nasher.