Project - Not Monster - Page 15

Yorkie · 05-04-2015, 04:05 PM

Yorkie

Yorkie · 05-04-2015, 04:07 PM

Gave the SS a bit of a polish and wax with some AutoGlym HD Wax and other nice smelling AutoGlym stuff:

Yorkie

Yorkie · 17-07-2015, 01:43 PM

Second MOT today, had to get it done for my house move on Tuesday. Not sure how it will go, a few raised eyebrows when I rolled into the MOT centre.

I just left it with them so I will wait for the call!

Yorkie

Yorkie · 18-07-2015, 11:06 AM

Well, .… front break light switch needs replacing and apparently I need a reflector for the rear of the bike. Apart from that all is well.

I will pick it up on Tuesday.

Yorkie

Yorkie · 19-08-2015, 06:13 PM

Because I haven't wired up anything on this project apart from the lights and speedo unit, the oil pressure switch is redundant. So I decided to fit this instead:

Yorkie

20-08-2015, 09:19 PM

Nice work, remember to set the gap correctly

20-08-2015, 10:05 PM

Careful, that plug might not run right. Check it regularly for being wet/sooty.

Yorkie · 20-08-2015, 10:19 PM

Quote:

Nice work, remember to set the gap correctly

Quote:

Careful, that plug might not run right. Check it regularly for being wet/sooty

Thank you for the advice.

Yorkie

Yorkie · 21-02-2016, 01:45 PM

Well after a Hampshire/Wiltshire breakfast meet I decided to fit my newly sprayed clutch pressure plate to my SS ......

I know I need some shiny springs .... Oh and it glows in the dark!! Right this weather needs to become dry rapidly as I only do things like this when I'm bored!

Yorkie

Albie · 21-02-2016, 04:08 PM

Quote:

Originally Posted by Yorkie

Well after a Hampshire/Wiltshire breakfast meet I decided to fit my newly sprayed clutch pressure plate to my SS ......

I know I need some shiny springs .... Oh and it glows in the dark!! Right this weather needs to become dry rapidly as I only do things like this when I'm bored!

Yorkie

WOW it's been Rossi'd

Yorkie · 21-02-2016, 04:29 PM

Quote:

WOW it's been Rossi'd

Hahaha. Never thought of that!

Yorkie

Yorkie · 28-01-2019, 08:31 PM

It has been a while since I have done anything with this ‘finished’ project but the exhaust headers feally needed sorting out.

So off to Mid-Wales to pay a visit to Mark at MADASL to get some stainless pipes made up to replace my cut and shut standard exhausts.

I am liking them already:

Yorkie

mickj · 29-01-2019, 08:36 AM

They look a whole lot better

Darkness · 29-01-2019, 10:35 AM

Much better: The “mummy” look always seems to be trying to hide something (Or hold it together instead of fixing it),

Yorkie · 29-01-2019, 11:03 AM

Quote:

Originally Posted by Darkness

Much better: The “mummy” look always seems to be trying to hide something (Or hold it together instead of fixing it),

It was hiding something, my rubbish welding.

Yorkie

05-04-2015, 04:05 PM	#211
Yorkie Anglo-Saxon Warrior Join Date: Aug 2002 Location: North Yorkshire Bike: M900 Posts: 2,485	Yorkie __________________ NO ICE, GUN IT!

05-04-2015, 04:07 PM	#212
Yorkie Anglo-Saxon Warrior Join Date: Aug 2002 Location: North Yorkshire Bike: M900 Posts: 2,485	Gave the SS a bit of a polish and wax with some AutoGlym HD Wax and other nice smelling AutoGlym stuff: Yorkie __________________ NO ICE, GUN IT!

17-07-2015, 01:43 PM	#213
Yorkie Anglo-Saxon Warrior Join Date: Aug 2002 Location: North Yorkshire Bike: M900 Posts: 2,485	Second MOT today, had to get it done for my house move on Tuesday. Not sure how it will go, a few raised eyebrows when I rolled into the MOT centre. I just left it with them so I will wait for the call! Yorkie __________________ NO ICE, GUN IT!

18-07-2015, 11:06 AM	#214
Yorkie Anglo-Saxon Warrior Join Date: Aug 2002 Location: North Yorkshire Bike: M900 Posts: 2,485	Well, .… front break light switch needs replacing and apparently I need a reflector for the rear of the bike. Apart from that all is well. I will pick it up on Tuesday. Yorkie __________________ NO ICE, GUN IT!

19-08-2015, 06:13 PM	#215
Yorkie Anglo-Saxon Warrior Join Date: Aug 2002 Location: North Yorkshire Bike: M900 Posts: 2,485	Because I haven't wired up anything on this project apart from the lights and speedo unit, the oil pressure switch is redundant. So I decided to fit this instead: Yorkie __________________ NO ICE, GUN IT!

20-08-2015, 09:19 PM	#216
squarehead Guest Posts: n/a	Nice work, remember to set the gap correctly

20-08-2015, 10:05 PM	#217
don_matese Guest Posts: n/a	Careful, that plug might not run right. Check it regularly for being wet/sooty.

21-02-2016, 01:45 PM	#219
Yorkie Anglo-Saxon Warrior Join Date: Aug 2002 Location: North Yorkshire Bike: M900 Posts: 2,485	Well after a Hampshire/Wiltshire breakfast meet I decided to fit my newly sprayed clutch pressure plate to my SS ...... I know I need some shiny springs .... Oh and it glows in the dark!! Right this weather needs to become dry rapidly as I only do things like this when I'm bored! Yorkie __________________ NO ICE, GUN IT!

28-01-2019, 08:31 PM	#222
Yorkie Anglo-Saxon Warrior Join Date: Aug 2002 Location: North Yorkshire Bike: M900 Posts: 2,485	It has been a while since I have done anything with this ‘finished’ project but the exhaust headers feally needed sorting out. So off to Mid-Wales to pay a visit to Mark at MADASL to get some stainless pipes made up to replace my cut and shut standard exhausts. I am liking them already: Yorkie __________________ NO ICE, GUN IT!

29-01-2019, 08:36 AM	#223
mickj Registered User Join Date: Jun 2018 Location: Clevedon Bike: M1200s Posts: 554	They look a whole lot better __________________ Keep the rubber side down. Mick

29-01-2019, 10:35 AM	#224
Darkness . Join Date: May 2007 Location: Stockbridge Bike: M900 Posts: 1,984	Much better: The “mummy” look always seems to be trying to hide something (Or hold it together instead of fixing it), __________________ Original and Best since 1993