Swingarm cracked...

[Dukedesmo]

Originally Posted by Mr Gazza

Your brake torque arm bracket is on upside down btw.

It only fits that way due to the counterbores, bear in mind it's not a Ducati part rather an Aella aftermarket so maybe a slightly different design?

https://shop.aella.jp/prdct_list.html?category_code=1

[900Rebuilder]

Originally Posted by Dukedesmo

It only fits that way due to the counterbores, bear in mind it's not a Ducati part rather an Aella aftermarket so maybe a slightly different design?

https://shop.aella.jp/prdct_list.html?category_code=1

Didnt see the rear brake listed under Monster, but this gave me a chuckle for its chinglish;

https://shop.aella.jp/item/IS00000N10718.html

[Mr Gazza]

Originally Posted by Dukedesmo

It only fits that way due to the counterbores, bear in mind it's not a Ducati part rather an Aella aftermarket so maybe a slightly different design?

https://shop.aella.jp/prdct_list.html?category_code=1

Oh! I don't think it would work at all that way round with standard Monster footrest hangers, as the shoulder bolts would disappear in the counterbores and you'd have to turn it over anyway. Besides being too thick for the bolts to reach.
It looks as heavy, if not heavier than a standard steel one and renders the brake virtually rigid with that geometry.
Bitza made one from a bit of 1/4" Dural I sent him, along with a pattern.

The rose joint will go either side, so that's not important.