Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 600 | Total Threads: 50,791 | Total Posts: 518,267 Currently Active Users: 637 (0 active members) Please welcome our newest member, carthagho |
|
|
Thread Tools | Display Modes |
22-09-2020, 06:33 PM | #1 |
Transmaniacon MOC
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,022
|
Mk 1 and 1.1 headlight round headlight
I have for sale a complete Mk 1/1.1 Monster Bosch headlight. The steel bowl, reflector, chrome ring (bezel) and wiring. The lens that came with it is cracked but I can include that if required. I've seen new glass lens for £25/30 so it's not that expensive to replace it should you need to.
The rest of it is in reasonable condition but will post photos as soon as I get chance. £30 +p&p for the lot seems OK and a lot cheaper that buying one of ebay. Let me know if your interested? Thanks
__________________
Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage |
27-09-2020, 05:45 PM | #2 |
Transmaniacon MOC
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,022
|
Free to a good home: Mk 1 and 1.1 headlight round headlight
Ok, after a quick visual re-assessment of this I've found it is less serviceable than I originally thought. So I'm now offering it up as spares or repairs, free to a good home. Just pay me the postage cost and you can have the whole lot.
The glass is cracked all the way across but seems stable. Not sure if this is MOT fail or not? The reflector is from what I can tell pretty good but the lamp holder clip is missing and someone has hot glued the bulb in a spot to hold it in place of the missing clip. I can't see anything obviously broken or missing from the bulb holder part of the reflector so I assume it's just the bulb holder wire clip that is missing. The chrome bezel is damaged very slightly as it has a small dink in the front edge on the right hand side and some small scratches consistent with a low speed drop, which probably originally caused the lens to crack. it's about level with the mounting bracket a couple of mm. So although its far from perfect, it is functional and the chrome is generally pretty good, no pitting or corrosion, should polish up ok. The bowl is clean and the paint inside is really good and clean, there is some corrosion on the outside in the center protruding part, so will will need a good rub down and paint on the outside at least to make good but is otherwise appears to be damage free. Wiring loom has been wrapped with electrical tape but the correct plugs are there but the rubber grommet is missing. I could not guarantee if its any good or not, the plugs are all there and I recently paid over £20 for a good one of these from a breaker. I have removed the screw and clip from the bezel, so this is not included and you will need to source these or use the one you already may have.
__________________
Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage Last edited by Darren69; 27-09-2020 at 06:10 PM.. |
|
|