Will my arrow exhausts fit??

23-05-2012, 02:38 PM

Hi all,
I got a pretty good deal on some arrow slip-on exhausts from a guys who took them of a 900.

I think they are pretty old (10 years or so judging by the date on the box), on the box it says they will fit 600/750/and 900.

Just wondering if they will fit my 2007 620 which i am guessing wasnt in production when the exhausts were made...

...and excusing my ignorance but if i do get them to fit could they do any engine damage, back up preasure etc

Thanks for any help

slob · 23-05-2012, 02:51 PM

They will *probably* fit fine, you may want to get the exhaust gas checked and if it needs it, ECU adjusted by Ducati specialist/dealer.
Less back pressure will likely mean it runs a little leaner. Ducati Wolverhampton are top people and in your neck of the woods.

gary tompkins · 23-05-2012, 03:11 PM

My 900ie actually ran richer at low RPM when Silmotor cans were fitted

Either way it pays to get it checked out

24-05-2012, 01:33 PM

Fitted them today, took a bit of a wriggle but they look pretty ace...
will be popping to the Ducati dealer at the weekend though to get a quick check over.

Thanks for the advice

23-05-2012, 02:38 PM	#1
matthuds Guest Posts: n/a	Will my arrow exhausts fit?? Hi all, I got a pretty good deal on some arrow slip-on exhausts from a guys who took them of a 900. I think they are pretty old (10 years or so judging by the date on the box), on the box it says they will fit 600/750/and 900. Just wondering if they will fit my 2007 620 which i am guessing wasnt in production when the exhausts were made... ...and excusing my ignorance but if i do get them to fit could they do any engine damage, back up preasure etc Thanks for any help

23-05-2012, 03:11 PM	#3
gary tompkins 1/2 man - 1/2 pogo-stick Join Date: Aug 2002 Location: Dartford, Kent Bike: M900ie Posts: 7,241	My 900ie actually ran richer at low RPM when Silmotor cans were fitted Either way it pays to get it checked out __________________ GT Fully paid up member of the S.A.S. (Scottoiler Appreciation Society) 27,000 miles on original chain - and still going strong!

23-05-2012, 02:51 PM	#2
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,716	They will probably fit fine, you may want to get the exhaust gas checked and if it needs it, ECU adjusted by Ducati specialist/dealer. Less back pressure will likely mean it runs a little leaner. Ducati Wolverhampton are top people and in your neck of the woods.

24-05-2012, 01:33 PM	#4
matthuds Guest Posts: n/a	Fitted them today, took a bit of a wriggle but they look pretty ace... will be popping to the Ducati dealer at the weekend though to get a quick check over. Thanks for the advice