UK Monster Owners Club Forum » .: Technical :. » Engines, Clutch, Gears » Exhaust studs

Reply
 
Thread Tools Display Modes
Old 05-02-2020, 12:14 PM   #1
Joshua Brew
Registered User
 
Joshua Brew's Avatar
 
Join Date: Feb 2017
Location: Wrexham
Bike: M1100evo
Posts: 55
Exhaust studs

Hi Guys

the bike is an 1100 evo

i am going to replace my timing belts this summer and to do so i need to remove the exhaust. i've noticed that one of the nuts on the lower cylinder manifold is seized onto the stud, that is in turn screwed in to the cylinder head.

Has anyone removed or replaced these studs? The last thing i want to do is strip the thread in the head! The stud with the nut seized on to it does seem to unscrew but its quite tight.

Last edited by Joshua Brew; 05-02-2020 at 12:19 PM..
Joshua Brew is offline   Reply With Quote
Old 05-02-2020, 12:57 PM   #2
Ron1000
Registered User
 
Ron1000's Avatar
 
Join Date: Jun 2015
Location: Livingston
Bike: M1100evo
Posts: 862
Yes I done this very recently.

I'd say for you to give moto-rapido a phone and get the bits ordered first...that's what I done.

And as you say never a nice task due to worrying about stripping and snapping etc.

I'd recommend an overnight plus gas first then have a go at it. No secret technique just very gently apply pressure and it should start to move....... an old trick is to try (gently) tightening it before loosening.

If it all goes pear shaped a welder should be able to weld a nut on whats left; that and the heat usually does the trick (recent experience with that too after I snapped my VFR stud).

if you get it all out just bin the old studs and nuts and fit new everything paying attention to correct torque figures and what thread lock or copper slip etc to use.

Be careful with the old gasket, it's silver and metal covered so at first glance it'll look like one hasn't been fitted. I just prized it out with a screw driver and chucked it in the bin too....mind and fit a new one when going back together.
Ron1000 is offline   Reply With Quote
Old 05-02-2020, 01:28 PM   #3
Darren69
Transmaniacon MOC
 
Darren69's Avatar
 
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,011
Stainess studs are available from ebay sellers. Probably cheaper than buying standard ones.
__________________
Roast Beef Monster!

Termignoni and Bucci - Italian for pipe and slippers!

S4 Fogarty, S4R 07T, 748, Series 1 Mirage
Darren69 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT. The time now is 01:47 PM.

vBulletin Skins by vBmode.com. Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.