Best pattern tool for head nuts?

Nasher · 15-08-2018, 02:25 PM

If you go the crows foot route, which is my preferred type, just remember to keep the torque wrench at 90deg to the crows foot or you'll be over-tightening them.

I ended up using a longer one like this last time as it gives you more room to move with the Torque wrench.
https://www.ebay.co.uk/itm/Ducati-Cy...IAAOxyNDxRX-jm

I did work out the force diagram once and can confirm the 90deg bit works for whatever length Crows foot you use.

Nasher

15-08-2018, 02:25 PM	#5
Nasher Registered User Join Date: Jul 2014 Location: Portsmouth Bike: M900 Posts: 1,510	If you go the crows foot route, which is my preferred type, just remember to keep the torque wrench at 90deg to the crows foot or you'll be over-tightening them. I ended up using a longer one like this last time as it gives you more room to move with the Torque wrench. https://www.ebay.co.uk/itm/Ducati-Cy...IAAOxyNDxRX-jm I did work out the force diagram once and can confirm the 90deg bit works for whatever length Crows foot you use. Nasher __________________ Heaven doesn't want me, and Hell is afraid I'll take over. Last edited by Nasher; 15-08-2018 at 02:30 PM..