2018 Monster remap

03-06-2019, 05:32 PM

Has anyone had a 2018 or later Monster remapped? If so where and has it been beneficial.

I've put my Werkes GP pipe back on with a baffle to reduce some of the noise but I still get some backfiring on deacceleration…

Baffle required as I'm off to black forest in a couple of weeks and don't want any unwanted attention from the feds!!!

Also just replaced original rosso 111 with Bridgestone S20 evo, I got nearly 3000 out of the rear which isn't bad. must getting slow in my old age!!!

rollo22 · 03-06-2019, 05:48 PM

Give JHP coventry a call.

Grumpy · 03-06-2019, 08:55 PM

I owned a monster 1200 before the 1200r, to which a Werkes exhaust was fitted ( which is now in the 1200r). This was a couple of years ago.
To improve the overall running of the 1200, I spoke to several tuners about having a custom map installed. At the time the only people who claimed they could achieve this was Dave Woods of Aylesbury. Who i believe have moved.
I spoke to two other tuners, who claimed the only way to change the mapping as to send the ecu to Rexxer in Germany for a generic 're map.
This may have changed in the past couple of years, so worth phoning around.

chris.p · 04-06-2019, 05:35 AM

There are plenty of Rexxer map dealers in the UK, if JHP can not do it there is Neil at Cornerspeed Ducati who does it drive in or postal, give him a ring.

http://cornerspeed.co.uk/

04-06-2019, 04:52 PM

yes I could but I bought the bike from JHP and thought it might iffy for warranty......

chris.p · 05-06-2019, 05:14 AM

Quote:

Originally Posted by Killjoy

yes I could but I bought the bike from JHP and thought it might iffy for warranty......

Cornerspeed is an official Ducati Service Centre

slob · 05-06-2019, 08:12 AM

the hidden question is have rexxer cracked the emcryption on the bosch or siemens ecu yet? right now the only ‘official’ option is termis and ducati flash remap afaik

rollo22 · 05-06-2019, 12:47 PM

Just found this

http://rexxer.co.uk/e_index.cfm

slob · 05-06-2019, 01:04 PM

Bang on the money Rollo, quick call/email to Nellie at Cornerspeed to confirm and away you go, Unless you can get a full dyno run at eg JHP, which would be a better result but £££

Pedro · 05-06-2019, 04:56 PM

As I understand it, the 1200 and 1200S use a different ecu than the R and the encryption is much lower. To my knowledge no one has properly cracked the R to reflash it.

06-06-2019, 05:44 PM

Thanks guys, spoke to corner speed and they can do it but need bike for 48 hours as they need to download existing ECU date and send to rexter who then give an unlock code...…..

03-06-2019, 05:32 PM	#1
Killjoy Guest Posts: n/a	2018 Monster remap Has anyone had a 2018 or later Monster remapped? If so where and has it been beneficial. I've put my Werkes GP pipe back on with a baffle to reduce some of the noise but I still get some backfiring on deacceleration… Baffle required as I'm off to black forest in a couple of weeks and don't want any unwanted attention from the feds!!! Also just replaced original rosso 111 with Bridgestone S20 evo, I got nearly 3000 out of the rear which isn't bad. must getting slow in my old age!!!

03-06-2019, 05:48 PM	#2
rollo22 Moderator Join Date: Apr 2008 Location: Moreton-in-Marsh Bike: M1100evo Posts: 1,082	Give JHP coventry a call. __________________ IF ALL ELSE FAILS READ THE INSTRUCTIONS

03-06-2019, 08:55 PM	#3
Grumpy record breaker!! Join Date: Apr 2006 Location: Peterborough Bike: M1200R Posts: 2,154	I owned a monster 1200 before the 1200r, to which a Werkes exhaust was fitted ( which is now in the 1200r). This was a couple of years ago. To improve the overall running of the 1200, I spoke to several tuners about having a custom map installed. At the time the only people who claimed they could achieve this was Dave Woods of Aylesbury. Who i believe have moved. I spoke to two other tuners, who claimed the only way to change the mapping as to send the ecu to Rexxer in Germany for a generic 're map. This may have changed in the past couple of years, so worth phoning around. __________________ It's not the destination, but the journey that matters Definition of a motorbike, a devise for overtaking cars!

05-06-2019, 08:12 AM	#7
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,707	the hidden question is have rexxer cracked the emcryption on the bosch or siemens ecu yet? right now the only ‘official’ option is termis and ducati flash remap afaik Last edited by slob; 05-06-2019 at 08:25 AM..

05-06-2019, 12:47 PM	#8
rollo22 Moderator Join Date: Apr 2008 Location: Moreton-in-Marsh Bike: M1100evo Posts: 1,082	Just found this http://rexxer.co.uk/e_index.cfm __________________ IF ALL ELSE FAILS READ THE INSTRUCTIONS

04-06-2019, 05:35 AM	#4
chris.p Gold Member Join Date: Mar 2004 Location: lincoln Bike: No Bike Yet! Posts: 876	There are plenty of Rexxer map dealers in the UK, if JHP can not do it there is Neil at Cornerspeed Ducati who does it drive in or postal, give him a ring. http://cornerspeed.co.uk/

04-06-2019, 04:52 PM	#5
Killjoy Guest Posts: n/a	yes I could but I bought the bike from JHP and thought it might iffy for warranty......

05-06-2019, 01:04 PM	#9
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,707	Bang on the money Rollo, quick call/email to Nellie at Cornerspeed to confirm and away you go, Unless you can get a full dyno run at eg JHP, which would be a better result but £££

05-06-2019, 04:56 PM	#10
Pedro Ciao, come stai? Join Date: Apr 2003 Location: Somewhere Bike: Multiple Monsters Posts: 4,157	As I understand it, the 1200 and 1200S use a different ecu than the R and the encryption is much lower. To my knowledge no one has properly cracked the R to reflash it. __________________ M900 - 1993! Monster 1200R!

06-06-2019, 05:44 PM	#11
Killjoy Guest Posts: n/a	Thanks guys, spoke to corner speed and they can do it but need bike for 48 hours as they need to download existing ECU date and send to rexter who then give an unlock code...…..