Ben's 900 Monster build

Mr Gazza · 02-05-2023, 03:51 PM

The standard alloy fork tubes on Monsters are 450mm long. (SS models are 500.)
No idea what 916 ones are, Maybe DD could measure?

The adjustable ones are standard on the Sie. They project 20mm above the top yoke. That's the fork leg not the including the adjusters.
The Sie models have longer risers as standard to clear all the gubbins, these will be available as a spare part I would imagine. Mine has a one piece top clamp, I imagine that gives the assembly a bit more rigidity. The clamping bolts are correspondingly longer.

There's probably no reason why you couldn't just double up the standard risers, using the appropriate bolts, but you would have half a handlebar hole showing.

02-05-2023, 03:51 PM	#11
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,831	The standard alloy fork tubes on Monsters are 450mm long. (SS models are 500.) No idea what 916 ones are, Maybe DD could measure? The adjustable ones are standard on the Sie. They project 20mm above the top yoke. That's the fork leg not the including the adjusters. The Sie models have longer risers as standard to clear all the gubbins, these will be available as a spare part I would imagine. Mine has a one piece top clamp, I imagine that gives the assembly a bit more rigidity. The clamping bolts are correspondingly longer. There's probably no reason why you couldn't just double up the standard risers, using the appropriate bolts, but you would have half a handlebar hole showing. __________________