Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 606 | Total Threads: 50,802 | Total Posts: 518,378 Currently Active Users: 372 (0 active members) Please welcome our newest member, andy10v |
|
|
Thread Tools | Display Modes |
30-06-2018, 01:50 PM | #13 | |
Registered User
Join Date: Mar 2010
Location: Beachtown
Bike: M900
Posts: 2,188
|
Quote:
As for where it fits to tension it up, I flattened the hook of the spring balance so it fits in the groove between the bearings but there's this guy on eBay selling these as a kit- I made the cup part up out of some metal we had at work but in reality it is really difficult to fit on a Monster engine because of the motor shape and frame tubes so I've never used it. https://www.ebay.co.uk/itm/DUCATI-PA...IAAOSw9r1V-E9q This is the method actually listed in the Haynes manual and they found the pull to be ten pounds on the spring balance- I just use a 'Little Samson' and check it using one then two bags of flour- always close enough and I've never re-tensioned them between changes either. https://www.ebay.co.uk/itm/SALTER-LI...gAAOSw3yxZmumE
__________________
You're perfect, yes, it's true- But without me you're only you! |
|
|
|