S4R fuel sensor

Dukedesmo · 11-12-2023, 10:50 AM

If it's like my M900 (i.e.) tank, then the pump is just held in a spring loaded clip and so pulls out easily and IIRC the power cable is a simple 2 pin plug though there maybe a simple lock/clip mechanism, I can't remember?

Best to undo the hoses and remove the whole assembly, like this;

But it is a job to get at due to the small opening and tight angle so expect scuffed wrists.

Much better the system used in 916 etc. where a removable plate is fitted to the underside of the tank and the whole assembly simply pulls out.

11-12-2023, 10:50 AM	#6
Dukedesmo Registered User Join Date: Sep 2010 Location: Leics Bike: M900 Posts: 2,844	If it's like my M900 (i.e.) tank, then the pump is just held in a spring loaded clip and so pulls out easily and IIRC the power cable is a simple 2 pin plug though there maybe a simple lock/clip mechanism, I can't remember? Best to undo the hoses and remove the whole assembly, like this; But it is a job to get at due to the small opening and tight angle so expect scuffed wrists. Much better the system used in 916 etc. where a removable plate is fitted to the underside of the tank and the whole assembly simply pulls out. __________________ M900, 916, LeMans II.