Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 607 | Total Threads: 50,804 | Total Posts: 518,385 Currently Active Users: 983 (0 active members) Please welcome our newest member, WazS4r |
|
|
Thread Tools | Display Modes |
|
28-05-2020, 02:17 PM | #1 |
Registered User
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 392
|
I have to say my new Iphone takes great photos! in fact I have stopped using my SLR all together now!
Been out and about the last few days bedding things in after the rebuild... one thing I noticed was its slow to turn over when you start it. I had upgraded the cables, and the starter itself was good, so I had another look at the timing. When I did the map, I had the first RPM point at 400 with 10 degrees BTDC and the second at 1000 again with 10 degrees... so i changed this to 5 degrees from 400 to 1000, so there is not so much advance at cranking speed. I also configured the software so it did two full dead revolutions before it sparks...* this means the engine is properly spinning before it fires... It really spins over now and starts MUCH better |
28-05-2020, 04:04 PM | #2 |
.
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,713
|
Is the ECU an M5.9? what software do you use?
|
29-05-2020, 07:53 AM | #3 |
Transmaniacon MOC
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,026
|
It's Ignitech 3D mapping with carbs, I believe, no EFI.
__________________
Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage |
|
|