Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 673 | Total Threads: 50,934 | Total Posts: 519,365 Currently Active Users: 1,129 (0 active members) Please welcome our newest member, Mozzer46 |
|
|
Thread Tools | Display Modes |
02-04-2024, 01:30 PM | #1 |
Old Git
Join Date: May 2006
Location: Cricklade
Bike: Multiple Monsters
Posts: 2,897
|
polish up old windscreen ??
my 750ss windscreen needs a good clean and polish whats thge best method ,, at work we used to use liquid brasso and a soft cloth to get scratches out of expensive sub sea lenses would that be ok on motorcycle ????or other ideas ???
__________________
MONSTERMAN |
02-04-2024, 02:21 PM | #2 | |
Too much time on my hands member
Join Date: Jun 2007
Location: Forest Of Dean
Bike: S2r
Posts: 3,206
|
Quote:
Polycarbonate screens on bikes won't have any significant surface hardening, they'd keep snapping if they did. I'd treat it the same as a visor ... Warm soft soapy water, spray or pour onto one side and then wipe gently with a microfibre cloth to remove crud. By wipe I mean like sweeping NO circular scrubbing as any fine grit just marks the surface. Wash off with clean water. Repeat on the other side and if there's still grub repeat. Blot any water on the surfaces with a chammy and leave it to dry. Else scrub it with brasso and then repeat with finer and finer grade abrasives to remove the scratches the brasso put into it. Hours later it will be clear again.
__________________
"The final measure of any rider's skill is the inverse ratio of his preferred Traveling Speed to the number of bad scars on his body." Song of the sausage creature |
|
02-04-2024, 04:09 PM | #3 |
Lord of the Rings
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,963
|
They do say that toothpaste works on faded and scratched plastic headlamps, but I've never tried it.
A Cortina-E fanatic once told me he polished his chrome with Perspex polish. E-ites are even dafter that you Jerry, but if you can find some Pespex polish it might be worth a shot?
__________________
|
02-04-2024, 04:58 PM | #4 |
.
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,733
|
would paintwork rubbing compound work?
|
02-04-2024, 05:08 PM | #5 |
Registered User
Join Date: May 2014
Location: Leamington Spa
Bike: Multiple Monsters
Posts: 99
|
Yes, fine rubbing compound works. I used to polish screens on aircraft with scratch remover, worked well on both glass and polycarbonate
__________________
Ride it naked! |
02-04-2024, 07:12 PM | #6 |
Old Git
Join Date: May 2006
Location: Cricklade
Bike: Multiple Monsters
Posts: 2,897
|
the subsea lenses had a 15mm clear lexan end cap thats what got scratched by barnacles , structures etc the glass leanses were inside
__________________
MONSTERMAN |
03-04-2024, 12:55 AM | #7 |
Transmaniacon MOC
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,091
|
T cut or something may work.
__________________
Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage |
23-05-2024, 01:31 PM | #8 |
Bronze Member
Join Date: Jun 2006
Location: Burton on Trent
Bike: M900
Posts: 250
|
Toothpaste should work. I’ve successfully used it on car headlamps in the past, and the car aftermarket uses an abrasive kit on many discoloured MOT-fail headlamps. Probably best to try it on a lower corner first.
__________________
Owning a Monsta is not the beginning of the end, but it may well be the end of the beginning.... |
23-05-2024, 02:16 PM | #9 |
Registered User
Join Date: Sep 2010
Location: Leics
Bike: M900
Posts: 2,894
|
As above, Brasso, T-cut & toothpaste all work on perspex, scratched CD/DVD, polycarbonate watch faces etc. use them in order of 'abrasiveness'.
__________________
M900, 916, LeMans II. |
|
|