Quote:
Originally Posted by Ron1000
It’s honestly not that hard. 176nm. Wheel on deck and someone holding brake and front of the bike.
That bolt setup looks sketchy at best.
|
I can't always rely on having an assistant, so I use an ABBA stand and a ratchet strap. Hook the strap over the ABBA stand where it fits into the swing arm bolt, through the back wheel and take up the slack with the ratchet. Works for loosening as well as tightening if you adjust where the strap goes through the wheel. If you use a paddock stand then you can hook the strap on a frame tube/footrest bracket
Threaded Mode