Ready to Go

pooh · 02-12-2010, 07:06 PM

Well folks after three years its done. All I need is sunshine and some dry roads to see how she rides.

Pooh

Albie · 02-12-2010, 07:14 PM

Well done fella and I would save it until next year. Maybe xmas day will be ok though as it never snows then. Drinks on you then.

02-12-2010, 07:41 PM

Nice , nice , nice

gary tompkins · 02-12-2010, 08:56 PM

Looks good Ian - well done

Paranoid Dave · 03-12-2010, 07:58 AM

Nice job there Ian, but why not paint the tail to match the tank ???

LouSCannon · 03-12-2010, 08:01 AM

Looking good!! I like..!

Stafford · 03-12-2010, 09:04 AM

Looks good, time for a write up and some more pictures please.

pooh · 03-12-2010, 11:06 AM

PD I am waiting for a stripe kit to come from Ducati for the tail unit. I am still not sure whether the final colour will be as per the photo. I would like the stripes and writing to be the same colour as the frame but would mean I have to paint everything. I still have some bits to get like rearsets etc. also got to get some more bits powdercoated eventually like the clutch cover and speedo bracket. The power commander needs setting up and mounting under the tank its just tie wrapped to the side of the frame for ease of access while on the dyno.
Stafford I will look through the photos I have and post them in sequence.

Pooh

03-12-2010, 01:21 PM

Well done a closet shot of the back would be good .. I think my eyes are getting old

Grumpy · 03-12-2010, 09:01 PM

Cracking job!
Going to bring it to the weekender and enter it in the bike competition?

03-12-2010, 10:42 PM

Love it very nice, a few more higher quailty shots would be good

Cheers Vince

04-12-2010, 12:37 PM

Good job done you've done with that.

04-12-2010, 06:51 PM

Looks great. hope to see it in the flesh/metal soon.

ricky · 05-12-2010, 09:08 PM

lovely bike... tell me was the aftermarket clocks hard to fit? did u use the original clock ecu?? cheers

pooh · 05-12-2010, 11:14 PM

Ricky
Clocks easy to fit but no good for you mate the clocks on your bike control everything so you are stuck with what you have.

Pooh

02-12-2010, 07:14 PM	#2
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,033	Well done fella and I would save it until next year. Maybe xmas day will be ok though as it never snows then. Drinks on you then. __________________ http://albies93m900.blogspot.co.uk/

02-12-2010, 08:56 PM	#4
gary tompkins 1/2 man - 1/2 pogo-stick Join Date: Aug 2002 Location: Dartford, Kent Bike: M900ie Posts: 7,241	Looks good Ian - well done __________________ GT Fully paid up member of the S.A.S. (Scottoiler Appreciation Society) 27,000 miles on original chain - and still going strong!

03-12-2010, 07:58 AM	#5
Paranoid Dave Is it meant to do that? Join Date: Aug 2002 Location: Innit Bike: Other Ducati Posts: 2,198	Nice job there Ian, but why not paint the tail to match the tank ??? __________________ Goodbye Audrey Hello Eric

03-12-2010, 08:01 AM	#6
LouSCannon These must fit a Monster? Join Date: Dec 2007 Location: Stockton Heath Bike: Multiple Monsters Posts: 1,036	Looking good!! I like..! __________________ "Sometimes it takes a whole tankful of fuel before you can think straight."

03-12-2010, 09:04 AM	#7
Stafford P3, nice. Join Date: Jun 2006 Location: Calne Bike: S2r 1000 Posts: 2,145	Looks good, time for a write up and some more pictures please. __________________ celeres-racing.blogspot.co.uk/ The probability of survival is equal to the angle of arrival.

02-12-2010, 07:41 PM	#3
Dookbob Guest Posts: n/a	Nice , nice , nice

03-12-2010, 11:06 AM	#8
pooh Lincolnshire Area Rep Join Date: Oct 2002 Location: Grimsby Bike: M900ie Posts: 469	PD I am waiting for a stripe kit to come from Ducati for the tail unit. I am still not sure whether the final colour will be as per the photo. I would like the stripes and writing to be the same colour as the frame but would mean I have to paint everything. I still have some bits to get like rearsets etc. also got to get some more bits powdercoated eventually like the clutch cover and speedo bracket. The power commander needs setting up and mounting under the tank its just tie wrapped to the side of the frame for ease of access while on the dyno. Stafford I will look through the photos I have and post them in sequence. Pooh __________________ Slighty less brain cells than I was born with

03-12-2010, 01:21 PM	#9
He11cat Guest Posts: n/a	Well done a closet shot of the back would be good .. I think my eyes are getting old

03-12-2010, 09:01 PM	#10
Grumpy record breaker!! Join Date: Apr 2006 Location: Peterborough Bike: M1200R Posts: 2,154	Cracking job! Going to bring it to the weekender and enter it in the bike competition? __________________ It's not the destination, but the journey that matters Definition of a motorbike, a devise for overtaking cars!

03-12-2010, 10:42 PM	#11
vtaggart Guest Posts: n/a	Love it very nice, a few more higher quailty shots would be good Cheers Vince

04-12-2010, 12:37 PM	#12
Mick E Guest Posts: n/a	Good job done you've done with that.

04-12-2010, 06:51 PM	#13
scrapps Guest Posts: n/a	Looks great. hope to see it in the flesh/metal soon.

05-12-2010, 09:08 PM	#14
ricky 5ft 3 of perfection!! Join Date: Nov 2005 Location: enniskillen Bike: M620 Posts: 524	lovely bike... tell me was the aftermarket clocks hard to fit? did u use the original clock ecu?? cheers __________________ wee man syndrome drunk: *Northern Irelands answer to common sense-NORTHERN IRELAND REP!!*

05-12-2010, 11:14 PM	#15
pooh Lincolnshire Area Rep Join Date: Oct 2002 Location: Grimsby Bike: M900ie Posts: 469	Ricky Clocks easy to fit but no good for you mate the clocks on your bike control everything so you are stuck with what you have. Pooh __________________ Slighty less brain cells than I was born with