Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 602 | Total Threads: 50,795 | Total Posts: 518,320 Currently Active Users: 454 (0 active members) Please welcome our newest member, Balders |
|
|
Thread Tools | Display Modes |
15-08-2020, 11:47 AM | #1 |
Member
Join Date: Sep 2011
Location: Telford
Bike: S4r
Posts: 174
|
Clutch lever hard
Recently fitted the EVR basket and plates, now when I do the spring bolts up anywhere near enough the clutch lever is rock hard. Tried 4 springs and taking out a plate but to no avail. Has anyone else experienced this? They are Oberon springs and bolts if that makes a difference.
|
15-08-2020, 11:54 AM | #2 |
Registered User
Join Date: Mar 2010
Location: Beachtown
Bike: M900
Posts: 2,188
|
Do you mean hard as in a firmer feel or do you mean it doesn’t operate properly?
Is the ‘stack height’ of the plates correct? I know there are two different depths of the spring caps- are you sure you have the correct set for your bike?
__________________
You're perfect, yes, it's true- But without me you're only you! |
15-08-2020, 12:02 PM | #3 |
Member
Join Date: Sep 2011
Location: Telford
Bike: S4r
Posts: 174
|
Sorted now, seems to have been a blockage.
|
15-08-2020, 12:06 PM | #4 |
Transmaniacon MOC
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,023
|
Hydraulic lock or slave piston got stuck?
__________________
Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage |
03-09-2020, 06:10 PM | #5 |
Member
Join Date: Sep 2011
Location: Telford
Bike: S4r
Posts: 174
|
Removed plates to clean, reinstalled them exactly the same way they came out. Now when i torque the spring bolts the lever is rock hard again? Bled the clutch but no difference, the only way to get it to move is by loosening the springs.
Was gonna try fitting the Oberon slave cylinder today but the bolt on the banjo has been minced! |
03-09-2020, 06:37 PM | #6 |
.
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,712
|
I’ve experienced this, it’s sometimes possible to misallign the pressure plate slightly, so it catches on the edge of the basket.
|
03-09-2020, 06:42 PM | #7 |
Member
Join Date: Sep 2011
Location: Telford
Bike: S4r
Posts: 174
|
|
03-09-2020, 07:06 PM | #8 |
.
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,712
|
I meant hub not basket but the effect is the same
|
|
|