Looking for a rivet band for a Sil Motor oval carbon can.

Flip · 23-02-2020, 04:16 PM

Jeff for the cans I’ve refurbished I’ve use these for the rivets:

https://rover.ebay.com/rover/0/0/0?m...2F310463748209

If you haven’t already got a decent rivet gun it’s worth the investment for stainless rivets as they can be pretty tough on the usual style hand operated ones.

Exhaust bands I’ve drilled myself from bought cut strips- loads of suppliers on eBay.

Don’t forget if using a carbon sleeve to line it with some heat reflecting tape or it’ll burn if it gets a ‘hot spot’ as the sound proofing ages.

https://rover.ebay.com/rover/0/0/0?m...2F303207108234

Finally for wadding I am a big fan of Acousta-fil:

https://rover.ebay.com/rover/0/0/0?m...2F360974388595

23-02-2020, 04:16 PM	#1
Flip Registered User Join Date: Mar 2010 Location: Beachtown Bike: M900 Posts: 2,188	Jeff for the cans I’ve refurbished I’ve use these for the rivets: https://rover.ebay.com/rover/0/0/0?m...2F310463748209 If you haven’t already got a decent rivet gun it’s worth the investment for stainless rivets as they can be pretty tough on the usual style hand operated ones. Exhaust bands I’ve drilled myself from bought cut strips- loads of suppliers on eBay. Don’t forget if using a carbon sleeve to line it with some heat reflecting tape or it’ll burn if it gets a ‘hot spot’ as the sound proofing ages. https://rover.ebay.com/rover/0/0/0?m...2F303207108234 Finally for wadding I am a big fan of Acousta-fil: https://rover.ebay.com/rover/0/0/0?m...2F360974388595 __________________ You're perfect, yes, it's true- But without me you're only you!