Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 605 | Total Threads: 50,802 | Total Posts: 518,377 Currently Active Users: 341 (0 active members) Please welcome our newest member, ian66 |
|
|
Thread Tools | Rating: | Display Modes |
|
16-03-2022, 08:17 AM | #1 |
Registered User
Join Date: Jan 2012
Location: Hull
Bike: M900
Posts: 75
|
Looking good Albie. Mine has the two screw number plate light. Not the steel number plate bracket through. Not noticed that before.
__________________
Keeping it real M900 (93), Multistrada 950, 900SS Project, Guzzi Breva 1100 |
16-03-2022, 09:27 AM | #2 | |
Registered User
Join Date: Sep 2010
Location: Leics
Bike: M900
Posts: 2,844
|
Quote:
Both my 916 and Guzzi had them fitted but I removed them as (to me) they're just unnecessary added weight.
__________________
M900, 916, LeMans II. |
|
16-03-2022, 07:07 PM | #3 | |
Fanactical volunteer
Join Date: Oct 2003
Location: Kent
Bike: M900
Posts: 9,033
|
Quote:
I work from the original fiche whether or not that's right or wrong. It's still the same on Ducati parts too. Weight saving doesnt come into my world much on resto. It's a solid fix no flapping around as it's also aluminium number plate on mine. Ooh weight save. I got my clutch seal kit yesterday and tomorrow I have no necessary work at the garage so can do my stuff. Today I did belts and valve checks etc on a nice 848. Having a ball in fact it's a real pleasure. .l
__________________
http://albies93m900.blogspot.co.uk/ |
|
16-03-2022, 07:15 PM | #4 |
Fanactical volunteer
Join Date: Oct 2003
Location: Kent
Bike: M900
Posts: 9,033
|
It also seems the Italians were lucky to get different braking on the rear.
indian baby boy names 2019
__________________
http://albies93m900.blogspot.co.uk/ |
17-03-2022, 06:03 PM | #5 |
Fanactical volunteer
Join Date: Oct 2003
Location: Kent
Bike: M900
Posts: 9,033
|
This afternoon I took on the task of replacing the insides of the replacement clutch master . Petty I know but I only changed it because it was a 2005 one and a rivet counter told me. It's such a small detail but it matters. Its 2 things as in the older has a radius on banjo fitting end and the reservoir top has bigger lettering and also a elephant on the bottom. A managed to get a PS13 kit thats 13mm piston and had to change this because the rubber cover was split and untidy. I removed the sight window and cleaned that as was dirty and yellowed but now clean. Before that it had a repaint too. It's not difficult to change the seals but there is very little info out there but common sense and care will get you there if you are safe to attempt this stuff. I followed this guys advice....
http://forums.ducatipaso.org/viewtopic.php?t=8289 It all work great following his knowledge. I also painted the brake one but I had a lucky escape because when I went to fit brake lever to it the piston was trying to push out. The circlip on this 15mm piston one had either not been fitted properly before or had crept out I dont know how mind. I took it apart and it was all there and after a thorough clean I reassembled it as it should be and now working as it should by hand. If it leaks I will order a new kit for that too. Fitted back the brake switch so now I just have to respray the other lid to swap it over. [url=https://postimg.cc/rdHrCZmj][/ur
__________________
http://albies93m900.blogspot.co.uk/ Last edited by Albie; 17-03-2022 at 06:06 PM.. |
18-03-2022, 08:16 AM | #6 |
Registered User
Join Date: Oct 2019
Location: Chorley
Bike: M900
Posts: 160
|
Anorak alert ! (Is there an emoji for this I wonder ? ).
Note the cylnder cap wording refers to using only dot 3+5 fluid from a sealed container. Well you can't mix dot 3 and dot 5 as the latter is a mineral oil and doesn't mix with dot 3. You could use dot 5 if all the brake components were new . I wonder if this is what Ducati or Brembo were thinking when making the set-up but I doubt it and I think it's just an error. Later caps just refer to using dot 4.
__________________
Contents may settle ! |
18-03-2022, 09:19 AM | #7 | |
Registered User
Join Date: Mar 2010
Location: Beachtown
Bike: M900
Posts: 2,188
|
Quote:
Glycol absorbs water (Hygroscopic) while Silicone repels it (Hydrophobic) hence why you shouldn’t use DOT 5 if the system has previously been filled with Glycol based fluid and why they cannot be mixed.
__________________
You're perfect, yes, it's true- But without me you're only you! |
|
18-03-2022, 11:06 AM | #8 | |
Fanactical volunteer
Join Date: Oct 2003
Location: Kent
Bike: M900
Posts: 9,033
|
Quote:
__________________
http://albies93m900.blogspot.co.uk/ |
|
18-03-2022, 11:20 AM | #9 | |
Registered User
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
|
Quote:
https://www.ducatisportingclub.com/s...ead.php?t=2521 |
|
|
|