Replacing carbs for M600

tridentperu · 28-09-2023, 11:57 AM

Yep, the pilot air screws suffer/ corrode and get stuck but originally there was a rubber bung over them, it is listed in the ducati spares book but at a stupid price. i suspect most have disappeared over the years hence the corrosion issue.

I measured the hole diameter (6.5mm) and bought a bag of five silicone bungs off ebay for about 2 quid inc postage, all I had to do was shorten them a bit and they fit right in. I put some acf50 of there first too, just to be on the safe side.

Jim

28-09-2023, 11:57 AM	#8
tridentperu Registered User Join Date: May 2019 Location: Gloucester Bike: M600 Posts: 32	Pilot air screw bungs Yep, the pilot air screws suffer/ corrode and get stuck but originally there was a rubber bung over them, it is listed in the ducati spares book but at a stupid price. i suspect most have disappeared over the years hence the corrosion issue. I measured the hole diameter (6.5mm) and bought a bag of five silicone bungs off ebay for about 2 quid inc postage, all I had to do was shorten them a bit and they fit right in. I put some acf50 of there first too, just to be on the safe side. Jim Last edited by tridentperu; 28-09-2023 at 11:59 AM..