UK Monster Owners Club Forum » .: Technical :. » Engines, Clutch, Gears » Chain and sprockets time

Reply
 
Thread Tools Display Modes
Old 04-06-2019, 10:00 AM   #1
Ron1000
Registered User
 
Ron1000's Avatar
 
Join Date: Jun 2015
Location: Livingston
Bike: M1100evo
Posts: 862
Chain and sprockets time

Hey guys,
Going to change my chain and sprockets time. Couple questions tho.

I’m looking to go back to the standard 15T Front and go up at the back, has anyone went up at the back? Was thinking 42T Rear would be reasonable! Has anyone went bigger? 44T Rear?

Also was think of a 520 conversation too.

Any thoughts and advice welcome.

Thanks again.
Ron1000 is offline   Reply With Quote
Old 04-06-2019, 11:34 AM   #2
Luddite
Registered User
 
Luddite's Avatar
 
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
Hi, Ron

I'll be trying 15/42 when I eventually replace the chain and sprockets. Don't forget you'll need a longer chain i.e. +2 links to 106 links. While I believe that a 43 tooth rear will still work with the 106 chain, I think clearance with the upper chain guard would be marginal, so a 44 would probably be too large.
Luddite is offline   Reply With Quote
Old 04-06-2019, 12:00 PM   #3
Ron1000
Registered User
 
Ron1000's Avatar
 
Join Date: Jun 2015
Location: Livingston
Bike: M1100evo
Posts: 862
Right 42 it is then. Thanks lud. Handy that as I can’t actually find a 44T anyway
Ron1000 is offline   Reply With Quote
Old 04-06-2019, 01:15 PM   #4
Ron1000
Registered User
 
Ron1000's Avatar
 
Join Date: Jun 2015
Location: Livingston
Bike: M1100evo
Posts: 862
Anybody had experience spec’ing Renthal chains.

So far I’ve managed to source the following:
15T Front Sprocket is renthal part no.433-525-15
42T Rear Sprocket is renthal part no.358A-525-42HA
All well up to that point.

However everywhere is pointing me the standard 39T chain fitment. Best I can see is the correct chain is renthal part No.525R4SRS-120
Ron1000 is offline   Reply With Quote
Old 04-06-2019, 02:04 PM   #5
Luddite
Registered User
 
Luddite's Avatar
 
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
Does it have to be Renthal, Ron? I've currently got a DID X-ring and it's wearing very well so I'll be replacing it with the same again (but with 106 links).

https://www.busters-accessories.co.u...%BE106/in/all/
Luddite is offline   Reply With Quote
Old 04-06-2019, 02:09 PM   #6
Ron1000
Registered User
 
Ron1000's Avatar
 
Join Date: Jun 2015
Location: Livingston
Bike: M1100evo
Posts: 862
Nah doesn’t have to be but kind of liked to keep it all the same…I’m weird like that

I’ll have a look at other options
Ron1000 is offline   Reply With Quote
Old 05-06-2019, 12:46 AM   #7
vince53
Registered User
 
vince53's Avatar
 
Join Date: Sep 2018
Location: taunton
Bike: M1100s
Posts: 41
just out of interest why you both going from a 14t front ?
vince53 is offline   Reply With Quote
Old 05-06-2019, 02:34 AM   #8
Luddite
Registered User
 
Luddite's Avatar
 
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
Quote:
Originally Posted by vince53 View Post
just out of interest why you both going from a 14t front ?
It's just a slightly more mechanically sympathetic way of achieving (virtually) the same gearing.

In theory, the smaller front sprocket gives the chain a harder time as it has to make a tighter turn to negotiate the sprocket. Also, the smaller front sprocket reduces clearance on the upper chain run so the chain can rub on the nylon swingarm guard and wear it away over time.

The advantage of choosing the small front sprocket is that it's quick and cheap.

On the other hand, retaining the standard 15 tooth sprocket and fitting a larger rear will give the chain an easier life and avoid any rubbing on the top run. The downside is that it requires a longer chain (106 links).

My 14/39 set up is working fine for me at the moment and I won't be changing just for the sake of it but, if and when the chain and/or sprockets wear out, I will replace them with a 15/42 arrangement.
Luddite is offline   Reply With Quote
Old 05-06-2019, 08:59 AM   #9
Ron1000
Registered User
 
Ron1000's Avatar
 
Join Date: Jun 2015
Location: Livingston
Bike: M1100evo
Posts: 862
My thoughts exactly +1
Ron1000 is offline   Reply With Quote
Old 05-06-2019, 09:27 AM   #10
mickj
Registered User
 
mickj's Avatar
 
Join Date: Jun 2018
Location: Clevedon
Bike: M1200s
Posts: 550
What sort of life are you getting out of a chain and sprocket set?
__________________
Keep the rubber side down. Mick
mickj is offline   Reply With Quote
Old 05-06-2019, 11:01 AM   #11
Luddite
Registered User
 
Luddite's Avatar
 
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
Quote:
Originally Posted by mjgt View Post
What sort of life are you getting out of a chain and sprocket set?
Well, my current set has done just over 9k with no signs of wear so I won't be ordering a new set any time soon.
Luddite is offline   Reply With Quote
Old 05-06-2019, 11:09 AM   #12
chris.p
Gold Member
 
chris.p's Avatar
 
Join Date: Mar 2004
Location: lincoln
Bike: No Bike Yet!
Posts: 876
You can’t go wrong with Tsubaki Chains & Renthal sprockets from B & C Express.

https://www.bandcexpress.co.uk/
chris.p is offline   Reply With Quote
Old 05-06-2019, 11:31 AM   #13
Ron1000
Registered User
 
Ron1000's Avatar
 
Join Date: Jun 2015
Location: Livingston
Bike: M1100evo
Posts: 862
Quote:
Originally Posted by mjgt View Post
What sort of life are you getting out of a chain and sprocket set?
By the time mines get replaced (full renthal set currently) they’ll be on about 18k. Atm they’re on 16k and the rear teeth are getting a wee bit pointy and sharp front isn’t to bad with only the slightest hint of hooking.

I’m a bit of a Lehman when it comes to chain wear but no matter the sprockets need done so chain will get done too
Ron1000 is offline   Reply With Quote
Old 05-06-2019, 01:06 PM   #14
350TSS
Too much time on my hands member
 
350TSS's Avatar
 
Join Date: Jan 2013
Location: Shipbourne
Bike: M900
Posts: 1,417
A 14T sprocket will wear out 7% earlier
350TSS is offline   Reply With Quote
Old 05-06-2019, 06:22 PM   #15
Chriswilly
Registered User
 
Join Date: Sep 2012
Location: gloucester
Bike: M900ie
Posts: 133
Recently replaced transmission to 15/38 (standard) and found she handled better in traffic - 'all be it' top speed is still ILLEGAL !!!
Chriswilly is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT. The time now is 12:18 PM.

vBulletin Skins by vBmode.com. Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.