2006 s2r 800

30-07-2009, 11:59 AM

My little beastie. (As she stood before I went to the Falkland Islands for 4 months - A few more bits have arrived since then, but its not all together yet!)

30-07-2009, 12:38 PM

hi looks very nice 'i take it full system ? did you have to change ecu ? or anything
where did youget it and how much dare i ask ?

30-07-2009, 01:00 PM

Its a Zard full system. It cost me (back in 2007) £830 (ish). I have a PCIII, but not a personalised map yet. Availability wise, you can get it at most places. I got mine from Spareshack.

30-07-2009, 01:03 PM

ok thanks 'and it runs ok without anything eles done ?

Yorkie · 30-07-2009, 01:04 PM

Nice to have you back and fettling!

Yorkie

30-07-2009, 01:13 PM

Quote:

Originally Posted by kneedown

ok thanks 'and it runs ok without anything eles done ?

Before I bought the PCIII it did burble abit more on the overrun, but it ran ok. I took my bike to an Italian bike independant dealer, who had a Ducati magic box, and altered the fueling a bit, but a PCIII will really sort it out a treat.

Just watch out, as the system doesnt com e with any heel guards, and I have melted 2 right foot boots....... but that will change after I do a quick mod (there are a few home made attempts floating around the net).

I also have pod filters which changed it alot more, so with stock airbox, it shouldnt be too bad.

They have released a 'shotgun' version now aswel

https://secure.speedycom.co.uk/shop/...cat=535&page=1

(The top image)

30-07-2009, 01:26 PM

it is prob bit more now than i can really spend 'been looking for second hand '
but without much luck .which dealer did you go to ?

30-07-2009, 01:33 PM

Spareshack mate.

30-07-2009, 01:34 PM

sorry i meant to get it running better

30-07-2009, 01:42 PM

When I took my bike for a service to Carl Harrison M/C, he done it then. He plugged his Ducati Diagnostic box into my ECU and did from there I think. Any official Duc dealer should have one

30-07-2009, 01:45 PM

ok cheers i'll have to keep looking 'like the look of akrapovic slip on .they are well made

30-07-2009, 02:01 PM

if you like the look of the akra's, then marving do a similar single can. they also can be got at Spareshack.

30-07-2009, 09:13 PM

I've burnt a pair of tainers and a pair of boots, I noticed the all too familiar black marks on the pipes. You running with baffles out, I do and they sound incredible, best mod I did to my S2R was going to black wheels. Prefer the colour and less to clean.

JerryXt · 30-07-2009, 09:55 PM

wocha Neil, how are you?

31-07-2009, 03:22 PM

Hey Jerry, I am pretty good! All is well!

Littlejimmy, I took the baffles out before I actually fitted the system!

I just bought a set of carbon guards that would normally fit to the standard 's' pipes, and will retro fit them..... Somehow!

Oh, and my carbon fetish is satisfied........................ for now!

30-07-2009, 11:59 AM	#1
neilbaldry Guest Posts: n/a	2006 s2r 800 My little beastie. (As she stood before I went to the Falkland Islands for 4 months - A few more bits have arrived since then, but its not all together yet!)

30-07-2009, 09:55 PM	#14
JerryXt everyone gets home safe Join Date: Jun 2007 Location: London Bike: S4Rs Posts: 933	wocha Neil, how are you? __________________ There is no depth to that mans talent... Sorry, there is no END to the depth of that mans talent.

30-07-2009, 12:38 PM	#2
kneedown Guest Posts: n/a	hi looks very nice 'i take it full system ? did you have to change ecu ? or anything where did youget it and how much dare i ask ?

30-07-2009, 01:00 PM	#3
neilbaldry Guest Posts: n/a	Its a Zard full system. It cost me (back in 2007) £830 (ish). I have a PCIII, but not a personalised map yet. Availability wise, you can get it at most places. I got mine from Spareshack.

30-07-2009, 01:03 PM	#4
kneedown Guest Posts: n/a	ok thanks 'and it runs ok without anything eles done ?

30-07-2009, 01:04 PM	#5
Yorkie Anglo-Saxon Warrior Join Date: Aug 2002 Location: North Yorkshire Bike: M900 Posts: 2,485	Nice to have you back and fettling! Yorkie

30-07-2009, 01:26 PM	#7
kneedown Guest Posts: n/a	it is prob bit more now than i can really spend 'been looking for second hand ' but without much luck .which dealer did you go to ?

30-07-2009, 01:33 PM	#8
neilbaldry Guest Posts: n/a	Spareshack mate.

30-07-2009, 01:34 PM	#9
kneedown Guest Posts: n/a	sorry i meant to get it running better

30-07-2009, 01:42 PM	#10
neilbaldry Guest Posts: n/a	When I took my bike for a service to Carl Harrison M/C, he done it then. He plugged his Ducati Diagnostic box into my ECU and did from there I think. Any official Duc dealer should have one

30-07-2009, 01:45 PM	#11
kneedown Guest Posts: n/a	ok cheers i'll have to keep looking 'like the look of akrapovic slip on .they are well made

30-07-2009, 02:01 PM	#12
neilbaldry Guest Posts: n/a	if you like the look of the akra's, then marving do a similar single can. they also can be got at Spareshack.

30-07-2009, 09:13 PM	#13
littlejimmy12 Guest Posts: n/a	I've burnt a pair of tainers and a pair of boots, I noticed the all too familiar black marks on the pipes. You running with baffles out, I do and they sound incredible, best mod I did to my S2R was going to black wheels. Prefer the colour and less to clean.

31-07-2009, 03:22 PM	#15
neilbaldry Guest Posts: n/a	Hey Jerry, I am pretty good! All is well! Littlejimmy, I took the baffles out before I actually fitted the system! I just bought a set of carbon guards that would normally fit to the standard 's' pipes, and will retro fit them..... Somehow! Oh, and my carbon fetish is satisfied........................ for now!