front axle spacer???750ss

jerry · 31-08-2023, 04:39 PM

Rebuilding my 750ss 1991 but during house move 2 items have gone missing side stand spring and little bracket which are easily available from EBAY

My 1991 750ss has been modified to dual disc so there was a custom made Spacer for right hand side of 17mm Axle , I need to make another now Im reckoning 17mm ID hole , and size of wheel bearing shoulder OD and about 20mm width for the gap between wheel bearing and fork leg , does that sound right ????

should it be steel or is aluminium OK

Mr Gazza · 31-08-2023, 04:47 PM

Ally would be fine I would have thought.

Put the wheel in and centre it all up using the brake to put the discs in the middle of the calipers and measure what you have left.

slob · 31-08-2023, 06:18 PM

Quote:

Originally Posted by jerry

Rebuilding my 750ss 1991 but during house move 2 items have gone missing side stand spring and little bracket which are easily available from EBAY

My 1991 750ss has been modified to dual disc so there was a custom made Spacer for right hand side of 17mm Axle , I need to make another now Im reckoning 17mm ID hole , and size of wheel bearing shoulder OD and about 20mm width for the gap between wheel bearing and fork leg , does that sound right ????

should it be steel or is aluminium OK

that word doesn't sound like a good place to be while machining parts

jerry · 31-08-2023, 06:50 PM

slob,,,, I will Micrometer it all precisely ha ha ,,
you know that once i make and buy the missing parts the originals will turn up ! sods law

31-08-2023, 04:39 PM	#1
jerry Old Git Join Date: May 2006 Location: Cricklade Bike: Multiple Monsters Posts: 2,897	front axle spacer???750ss Rebuilding my 750ss 1991 but during house move 2 items have gone missing side stand spring and little bracket which are easily available from EBAY My 1991 750ss has been modified to dual disc so there was a custom made Spacer for right hand side of 17mm Axle , I need to make another now Im reckoning 17mm ID hole , and size of wheel bearing shoulder OD and about 20mm width for the gap between wheel bearing and fork leg , does that sound right ???? should it be steel or is aluminium OK __________________ MONSTERMAN

31-08-2023, 04:47 PM	#2
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,963	Ally would be fine I would have thought. Put the wheel in and centre it all up using the brake to put the discs in the middle of the calipers and measure what you have left. __________________

31-08-2023, 06:50 PM	#4
jerry Old Git Join Date: May 2006 Location: Cricklade Bike: Multiple Monsters Posts: 2,897	slob,,,, I will Micrometer it all precisely ha ha ,, you know that once i make and buy the missing parts the originals will turn up ! sods law __________________ MONSTERMAN