UK Monster Owners Club Forum » .: Technical :. » Mods & How To's » Forks & Upgrades?

Reply
 
Thread Tools Display Modes
Old 15-08-2019, 11:18 AM   #1
stopintime
Registered User
 
stopintime's Avatar
 
Join Date: Dec 2010
Location: Oslo
Bike: S2r
Posts: 426
http://www.ducatimonsterforum.org/in...?topic=55303.0
stopintime is offline   Reply With Quote
Old 15-08-2019, 05:37 PM   #2
Jez900ie
Pleasantly surprised!
 
Jez900ie's Avatar
 
Join Date: Nov 2016
Location: Stoke on Trent
Bike: M900ie
Posts: 780
Quote:
Originally Posted by stopintime View Post
Thanks to you & Slob! That was very interesting. My engineering skills are not up to that level though so it will be a "pro fix" for my forks.

I have ordered the front wheel lifter for my Abba stand, so I will be able to check out the forks to confirm the adjuster is there. It will be a useful thing to have too.
__________________
Monsters don't hide under the bed, they sleep inside the shed

Last edited by Jez900ie; 15-08-2019 at 05:43 PM..
Jez900ie is offline   Reply With Quote
Old 15-08-2019, 08:23 PM   #3
Flip
Registered User
 
Flip's Avatar
 
Join Date: Mar 2010
Location: Beachtown
Bike: M900
Posts: 2,188
That is a great piece on engineering and perseverance but you have to weigh up not only personal ability to carry out the task but also how much time you actually want to dedicate to it Vs having a bike that can be ridden rather than constantly worked on.

For further information here are the basics of how Richard at Maxton described the issues I had with the standard (fully adjustable) Marzocchi forks on my 900:

As standard the (Marzocchi- can't speak for Showa) forks feel very notchy and harsh and kick off small bumps, this is because they have too much compression damping over small movements.

However, when you brake very hard you may be able to feel the forks bottom out, this is because there is not enough support in the compression damping over large movements. This is exaggerated when braking hard on a bumpy surface with each bump compounding the compression until eventually you would run out of travel.

The other problem with the damping is there is not enough rebound damping which means when you let go of the brake the forks spring back at you and the bike does not turn into the corner as well as it should, this also causes the bike to run wide out of a corner.

The springs inside the forks are actually too hard and Maxton fit softer springs to suit your rider weight and also to suit the type of riding you do.

The biggest improvement felt is from increasing the rebound damping to control the forks extension, reducing the compression damping over small bumps to stop the forks kicking off them and increasing it over large movements giving more support with the spring.

rac3r had a similar dilemma to this at the tail end of last year and again there were plenty of comments and opinions:

http://www.ukmonster.co.uk/monster/s...ghlight=maxton
__________________
You're perfect, yes, it's true- But without me you're only you!
Flip is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 03:55 AM.

vBulletin Skins by vBmode.com. Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.