Can otions for a M900 - Page 2

Darren69 · 02-06-2020, 08:15 AM

Will silicone sealant withstand the heat? I've used exhaust assembly paste on joints before to help make them gas tight but they are usually clamped on or use springs.

slob · 02-06-2020, 08:28 AM

Silicone should be ok, or exhaust paste. I’d buy a couple of stainless exhaust clams too.

walkingpictures · 07-07-2020, 10:35 AM

Just to add to this thread,I fitted a set of high level carbon Sil Moto cans to my M900 ie many years ago and it sounds lovely in my opinion.It always made me chuckle to think they were rated at something like 105dB which would have failed the noise test at race circuits even then!!

The other funny thing is it has always passed the MOT with the cans fitted

Kimbo

02-06-2020, 08:15 AM	#16
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,022	Will silicone sealant withstand the heat? I've used exhaust assembly paste on joints before to help make them gas tight but they are usually clamped on or use springs. __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

02-06-2020, 08:28 AM	#17
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,707	Silicone should be ok, or exhaust paste. I’d buy a couple of stainless exhaust clams too.

07-07-2020, 10:35 AM	#18
walkingpictures preneolithic frebie Join Date: Sep 2002 Location: Cambridge Bike: S4Rs Posts: 319	Just to add to this thread,I fitted a set of high level carbon Sil Moto cans to my M900 ie many years ago and it sounds lovely in my opinion.It always made me chuckle to think they were rated at something like 105dB which would have failed the noise test at race circuits even then!! The other funny thing is it has always passed the MOT with the cans fitted Kimbo