UK Monster Owners Club Forum » .: Technical :. » Kits & Accessories » Torque wrench recommended.

Reply
 
Thread Tools Display Modes
Old 03-04-2020, 07:41 PM   #1
Darren69
Transmaniacon MOC
 
Darren69's Avatar
 
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,011
Torque wrench recommended.

Hi, I'm looking for recommendations for a small 3/4 torque wrench for general use that will supplement my big 1/2 inch drive one that I use for wheel nuts and big high torque stuff etc. It doesn't have to be mega accurate just an analogue spring type and it shouldn''t break the back either, but that won't take much tbh atm.

I'm not sure on budget yet but any suggestions or what to avoid or any ebay bargains to consider are welcome?

Thanks
__________________
Roast Beef Monster!

Termignoni and Bucci - Italian for pipe and slippers!

S4 Fogarty, S4R 07T, 748, Series 1 Mirage
Darren69 is offline   Reply With Quote
Old 03-04-2020, 08:05 PM   #2
Ron1000
Registered User
 
Ron1000's Avatar
 
Join Date: Jun 2015
Location: Livingston
Bike: M1100evo
Posts: 862
3/4? That’s fairly massive. I use a sealey one for 3/8 And also 1/4…no the best in the world but certainly good enough for the home spannerer.

I have a 1/4 wera one for work stuff and they are very well made. Circa £80 for one tho.
Ron1000 is offline   Reply With Quote
Old 03-04-2020, 08:36 PM   #3
damien666
Registered User
 
Join Date: Dec 2010
Location: Leeds, West-Yorks
Bike: S4Rs
Posts: 497
I’ve had the Halfords 3/8 and 1/2” for a few years. Spot on. Made by Norbar i believe.
damien666 is offline   Reply With Quote
Old 03-04-2020, 08:41 PM   #4
slob
.
 
slob's Avatar
 
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,702
check out britool too
slob is offline   Reply With Quote
Old 03-04-2020, 08:50 PM   #5
Ron1000
Registered User
 
Ron1000's Avatar
 
Join Date: Jun 2015
Location: Livingston
Bike: M1100evo
Posts: 862
Britool expert are made by facom now…I’ve got some of the facom 440 range spanners, very nice they are.
Ron1000 is offline   Reply With Quote
Old 03-04-2020, 08:53 PM   #6
Luddite
Registered User
 
Luddite's Avatar
 
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
If you mean 3/8, Darren, then I can recommend Halfords' own 8-60Nm wrench, which covers 90% of my needs. It's not produced anymore but this is the current equivalent (12-60Nm):

https://www.halfords.com/tools/hand-...60-488695.html
Luddite is offline   Reply With Quote
Old 03-04-2020, 09:56 PM   #7
Flip
Registered User
 
Flip's Avatar
 
Join Date: Mar 2010
Location: Beachtown
Bike: M900
Posts: 2,188
I’ve had one of these (and it’s bigger 1/2” brother) for years now and it’s been great. I’ve taken it into work and checked it on our calibration meters and it’s always been spot on. Just remember to back it back to zero when you put it away after use.

https://rover.ebay.com/rover/0/0/0?m...2F272924810094
__________________
You're perfect, yes, it's true- But without me you're only you!
Flip is offline   Reply With Quote
Old 04-04-2020, 08:15 AM   #8
Darren69
Transmaniacon MOC
 
Darren69's Avatar
 
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,011
Yea, doh! I meant 3/8 not 3/4 as that is even bigger and I don't have sockets that big!
__________________
Roast Beef Monster!

Termignoni and Bucci - Italian for pipe and slippers!

S4 Fogarty, S4R 07T, 748, Series 1 Mirage
Darren69 is offline   Reply With Quote
Old 04-04-2020, 08:25 AM   #9
Ron1000
Registered User
 
Ron1000's Avatar
 
Join Date: Jun 2015
Location: Livingston
Bike: M1100evo
Posts: 862
I recently bought a 1000mm 3/4 breaker bar……t’is very big
Ron1000 is offline   Reply With Quote
Old 04-04-2020, 09:50 AM   #10
Darren69
Transmaniacon MOC
 
Darren69's Avatar
 
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,011
Is that for undoing your rear wheel nut with?
__________________
Roast Beef Monster!

Termignoni and Bucci - Italian for pipe and slippers!

S4 Fogarty, S4R 07T, 748, Series 1 Mirage
Darren69 is offline   Reply With Quote
Old 04-04-2020, 10:06 AM   #11
Ron1000
Registered User
 
Ron1000's Avatar
 
Join Date: Jun 2015
Location: Livingston
Bike: M1100evo
Posts: 862
Lololol. That is exactly it’s one and only job.

I tried a 600mm 1/2 and it doesn’t have the oompf.

My mate tried a 400nm loosening torque Milwaukee impact gun and it couldn’t do it…to the point he was convinced it was cross threaded. He then subsequently got it off with a 3/4 mac tools bar and Cheater bar.

Another one of my mates has a very heavy duty snap on gun and that took it off easily.

So I figured my options were very expensive snap on gun or cheaper 3/4 breaker bar.

Anybody in central Scotland I’m happy to let them borrow it…I know how much of a pain in the arse it is to do.

Also…sorry for thread hijack.
Ron1000 is offline   Reply With Quote
Old 04-04-2020, 10:37 AM   #12
rac3r
Guest
 
Posts: n/a
Are the silverline ones any good?
  Reply With Quote
Old 04-04-2020, 11:12 AM   #13
Luddite
Registered User
 
Luddite's Avatar
 
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
Quote:
Originally Posted by Ron1000 View Post
My mate tried a 400nm loosening torque Milwaukee impact gun and it couldn’t do it…to the point he was convinced it was cross threaded. He then subsequently got it off with a 3/4 mac tools bar and Cheater bar.

Another one of my mates has a very heavy duty snap on gun and that took it off easily.
I'm surprised the Milwaukee gun struggled, Ron. My basic Machine Mart cordless is only rated at 220Nm but works a treat for me. (I always put Moly grease on the threads and under the nut as per the manual, which might help.)
Luddite is offline   Reply With Quote
Old 04-04-2020, 11:49 AM   #14
damien666
Registered User
 
Join Date: Dec 2010
Location: Leeds, West-Yorks
Bike: S4Rs
Posts: 497
Quote:
Originally Posted by Luddite View Post
I'm surprised the Milwaukee gun struggled, Ron. My basic Machine Mart cordless is only rated at 220Nm but works a treat for me. (I always put Moly grease on the threads and under the nut as per the manual, which might help.)
Yeah, something amiss there. My 28 year old Taskmaster air gun does it no problem with a smallish Lidl compressor. Same with the flywheel nut.
damien666 is offline   Reply With Quote
Old 04-04-2020, 11:55 AM   #15
Ron1000
Registered User
 
Ron1000's Avatar
 
Join Date: Jun 2015
Location: Livingston
Bike: M1100evo
Posts: 862
I eventually got it off and there was no damage or anything so no harm no foul. Only thing I can think of is that I had the rear tyre done so I wonder if the guy gunned it on…would be weird tho…the guy has done bikes for me for 15 years and no issues.
Ron1000 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT. The time now is 01:48 PM.

vBulletin Skins by vBmode.com. Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.