Carbon number plate holder

29-12-2019, 12:40 PM

Third and final today ( there will be more to come )....this is another number plate holder, I cant tell if it was modified like yesterdays but its in a lot better condition. Its not a genuine Ducati part judging by the part number , comes with the 2 indicators from a panigale, I understand the part fits early Monsters but as always I would welcome advice from the knowledgeable on the forum

IMG_0108 by Mike OConnor, on Flickr

IMG_0110 by Mike OConnor, on Flickr

Mr Gazza · 29-12-2019, 03:28 PM

That looks very much like the one I've got on my 2000 M900Sie. The label seems to allude to an M900S '00 so that would match up. It should fit all models 2000 onwards till at least 2002 I would have thought.

The indicators are mounted in a non-standard position, they would normally go on the tea tray, but maybe this has been used with a tail tidy or summat?

utopia · 29-12-2019, 05:02 PM

Well, well.
Are those led indicators or the slightly larger bulb type ?
I had a number of discussions with Geoff about fitting the led indicators from later Ducatis to an early monster.
To that end I have in my possession three ex-panigale led indicators.
Its easy enough to fit them at the front but they are a mismatch to the std teatray at the back and it just looks wrong.
This looks like it ... might ... be a solution to that problem.
If so, and if this part will fit my yr2000 M750, it would be the absolutely most appropriate memento of Geoff imaginable, to have on my bike.
Can you post a few more pics, showing the fitment to the bike and the fitment and type of indicators used please.
If this can be made to fit my bike I am most definitely interested.

ps. Now that I look more closely and judging from the lack of an orange glow from the bulbs, I'm guessing that these are in fact the led indicators.
I posted the first bit rather hurriedly.

pps. ....and on re-reading, you do state that they are panigale indicators.
I got all excited and posted very hurriedly.

29-12-2019, 06:15 PM

.........and relax

.....no worries Jeff, I have had another response too on this item, let's see what can be worked out. My first issue is getting the photos you want, I need to collect from Barb to take a good look for you, I am working off the same pictures as you on this, I will see how soon I can get this done and get back to you

utopia · 29-12-2019, 06:35 PM

Quote:

Originally Posted by Moco1961

.........and relax.....

.....

Yeah, sorry but I went with the over-excitement partly because I thought it might be entertaining.
ie, only partly because I did actually get all over excited and didn't want to get pipped at the post....

But absolutely no worries either way.
And ta.

Mr Gazza · 29-12-2019, 06:57 PM

I'm nearly as exited..

As far as I can see with the same info as you, I'm sure it will fit your bike Jeff.
It also appears to have a neat little custom number plate illuminator?

stopintime · 29-12-2019, 07:08 PM

Please tell Barbara that pink doesn't work with carbon

bigredduke · 30-12-2019, 08:06 PM

If Utopia decides against, I would be interested. Actually, I am only after the indicators if someone just wants the number plate holder.

Luddite · 30-12-2019, 10:16 PM

I'm going for the 'anorak of the month' award here but, hopefully, this information will be of use to you, Mike.

From memory, I think ARL were one of the contractors that produced Ducati Performance carbon parts. Certainly, the part no. 09142 is a DP number before they went to the current eight digit plus letters format.

You're right about the fitment, Mike. This is for early Monsters up to and including 2001. The new part no. is 96911700B.

If you want an idea of value, there's currently an identical example (minus the indicators) in Italy on eBay for £76.

https://www.ebay.co.uk/itm/PARAFANGO...-/233113647232

Hope that helps.

Note to self: must get out more!)

31-12-2019, 04:55 AM

Brilliant Vince, as always Sir ! The one top right is the one in the second post,I think we have established its the one Darren sold to Geoff,what I can't confirm from the photo is if it was modified. I suspect it is as Geoff will have had to fix the indicators to each side.

The part no 091 12 looks familiar, Chris has one fitted to his.

31-12-2019, 04:57 AM

Quote:

Originally Posted by bigredduke

If Utopia decides against, I would be interested. Actually, I am only after the indicators if someone just wants the number plate holder.

Hi Paul, is it LED indicators you are after???

Doggy · 31-12-2019, 12:35 PM

Luddite=The oracle .

bigredduke · 31-12-2019, 04:17 PM

Quote:

Originally Posted by Moco1961

Hi Paul, is it LED indicators you are after???

Yes Mike. I have a pair of Panigale LED indicators on the rear & I would like to match them up on the front. I think the Panigale front set are integrated with the mirrors from memory so it would have to be another rear set.

the lodger · 31-12-2019, 04:33 PM

Sorry, I don't mean to steal your thread but thanks to Luddite I have just identified the rear plate/indicator unit that I was given when I bought my M900. It's a part no 091 12 as pictured above. It looks a bit peculiar in the hand but perhaps it looks better fitted. If anyone wants to make a fair offer for it please let me know . I'm not sure what a fair offer would be though so any input would be gratefully received.

uksurfer · 31-12-2019, 04:57 PM

Was this one of the tails that Geoff was making for Paul Smart Rep?

29-12-2019, 12:40 PM	#1
Moco1961 Guest Posts: n/a	Carbon number plate holder Third and final today ( there will be more to come )....this is another number plate holder, I cant tell if it was modified like yesterdays but its in a lot better condition. Its not a genuine Ducati part judging by the part number , comes with the 2 indicators from a panigale, I understand the part fits early Monsters but as always I would welcome advice from the knowledgeable on the forum IMG_0108 by Mike OConnor, on Flickr IMG_0110 by Mike OConnor, on Flickr

29-12-2019, 03:28 PM	#2
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,801	That looks very much like the one I've got on my 2000 M900Sie. The label seems to allude to an M900S '00 so that would match up. It should fit all models 2000 onwards till at least 2002 I would have thought. The indicators are mounted in a non-standard position, they would normally go on the tea tray, but maybe this has been used with a tail tidy or summat? __________________

29-12-2019, 05:02 PM	#3
utopia No turn left unstoned Join Date: Jun 2010 Location: leicester Bike: M750 Posts: 4,545	Well, well. Are those led indicators or the slightly larger bulb type ? I had a number of discussions with Geoff about fitting the led indicators from later Ducatis to an early monster. To that end I have in my possession three ex-panigale led indicators. Its easy enough to fit them at the front but they are a mismatch to the std teatray at the back and it just looks wrong. This looks like it ... might ... be a solution to that problem. If so, and if this part will fit my yr2000 M750, it would be the absolutely most appropriate memento of Geoff imaginable, to have on my bike. Can you post a few more pics, showing the fitment to the bike and the fitment and type of indicators used please. If this can be made to fit my bike I am most definitely interested. ps. Now that I look more closely and judging from the lack of an orange glow from the bulbs, I'm guessing that these are in fact the led indicators. I posted the first bit rather hurriedly. pps. ....and on re-reading, you do state that they are panigale indicators. I got all excited and posted very hurriedly. Last edited by utopia; 29-12-2019 at 05:07 PM..

29-12-2019, 06:15 PM	#4
Moco1961 Guest Posts: n/a	.........and relax.....no worries Jeff, I have had another response too on this item, let's see what can be worked out. My first issue is getting the photos you want, I need to collect from Barb to take a good look for you, I am working off the same pictures as you on this, I will see how soon I can get this done and get back to you

29-12-2019, 06:57 PM	#6
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,801	I'm nearly as exited.. As far as I can see with the same info as you, I'm sure it will fit your bike Jeff. It also appears to have a neat little custom number plate illuminator? __________________

29-12-2019, 07:08 PM	#7
stopintime Registered User Join Date: Dec 2010 Location: Oslo Bike: S2r Posts: 426	Please tell Barbara that pink doesn't work with carbon

30-12-2019, 08:06 PM	#8
bigredduke Nothing to see here Join Date: May 2005 Location: brough Bike: M1100evo Posts: 1,546	If Utopia decides against, I would be interested. Actually, I am only after the indicators if someone just wants the number plate holder.

30-12-2019, 10:16 PM	#9
Luddite Registered User Join Date: Aug 2011 Location: Southampton Bike: M1100evo Posts: 2,465	I'm going for the 'anorak of the month' award here but, hopefully, this information will be of use to you, Mike. From memory, I think ARL were one of the contractors that produced Ducati Performance carbon parts. Certainly, the part no. 09142 is a DP number before they went to the current eight digit plus letters format. You're right about the fitment, Mike. This is for early Monsters up to and including 2001. The new part no. is 96911700B. If you want an idea of value, there's currently an identical example (minus the indicators) in Italy on eBay for £76. https://www.ebay.co.uk/itm/PARAFANGO...-/233113647232 Hope that helps. Note to self: must get out more!)

31-12-2019, 04:55 AM	#10
Moco1961 Guest Posts: n/a	Brilliant Vince, as always Sir ! The one top right is the one in the second post,I think we have established its the one Darren sold to Geoff,what I can't confirm from the photo is if it was modified. I suspect it is as Geoff will have had to fix the indicators to each side. The part no 091 12 looks familiar, Chris has one fitted to his.

31-12-2019, 12:35 PM	#12
Doggy Registered User Join Date: Apr 2017 Location: Kent Bike: M796 Posts: 510	Luddite=The oracle .

31-12-2019, 04:33 PM	#14
the lodger Registered User Join Date: Oct 2019 Location: Chorley Bike: M900 Posts: 160	Sorry, I don't mean to steal your thread but thanks to Luddite I have just identified the rear plate/indicator unit that I was given when I bought my M900. It's a part no 091 12 as pictured above. It looks a bit peculiar in the hand but perhaps it looks better fitted. If anyone wants to make a fair offer for it please let me know . I'm not sure what a fair offer would be though so any input would be gratefully received. __________________ Contents may settle !

31-12-2019, 04:57 PM	#15
uksurfer Its all grey now Join Date: Jul 2008 Location: southampton Bike: M1200s Posts: 2,940	Was this one of the tails that Geoff was making for Paul Smart Rep? __________________ Evolution - M600 - S4 - M796 - M1100evo - M1200s