Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 605 | Total Threads: 50,801 | Total Posts: 518,376 Currently Active Users: 319 (0 active members) Please welcome our newest member, ian66 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
13-05-2021, 09:36 PM | #1 |
Registered User
Join Date: Mar 2021
Location: Carrickfergus
Bike: S4
Posts: 32
|
Thanks for the info, when I get the bike back will check what part numbers are on the ECU.
Cheers Davey |
18-05-2021, 10:14 PM | #2 |
Registered User
Join Date: Mar 2021
Location: Carrickfergus
Bike: S4
Posts: 32
|
Got the bike back tonight.
The mechanic had the bike on a Dyno run, just a short run to check fueling and as he suspected it was running massively lean, he reckons the power comander that was on the original spec was probably faulty and has been removed and the ECU isnt mapped for the engine mods. The guy running the Dyno tried but couldn't get in to remap anything. The ECU fitted to the bike has the following numbers: IAW 59M.A2 IAW 59M.A2/HW010/0115_099 12V=052 02 61600.630 996R DUCATI 007 Have had a look through the links on previous posts and reckon this is the standard S4 ECU, but it does say uprated ECU in the spec I got with the bike. As I said previously, electronics are not something I am good with. Can this ECU be modified/flashed/mapped, to suit or do I need a different ECU that can be modified/flashed/mapped. The other thing the mechanic thought could be causing a problem was fuel pressure but he checked this and was ok, so at least that was something ruled out. Thanks Davey |
20-05-2021, 11:29 AM | #3 | |||
Registered User
Join Date: Apr 2016
Location: Farnborough
Bike: M900sie
Posts: 171
|
Quote:
The iteration is time-consuming (erase takes about 30 minutes, re-program another 10 or so depending on size - at least, that's it used to take in the 80's for a 32K EPROM, lol). Modern ECUs are rather different, as they hold the map in volatile memory backed by flash; twiddle the settings on-the-fly while the motor is running and save the map when happy.. Quote:
I just received an ECU from Italy. In a Ducati box, with a 96506100B sticker on the box/ECU dustcap (which, of course, is removed once the ECU is fitted). It has exactly the same numbers on it, except that the "12V" line reads "12V 351 01". I fully expect the one already in the bike will look much the same, should I get motivated to go out and look.... I'm just ordering some cables; hopefully the map header will have some clues. Quote:
I have an older MoTeC M800 on my car. Love it. But cost me (used) about what I paid for my S4... Even if you bought a cheaper ECU (lots to choose from), you'd have to build a cable and probably take significant effort to figure out how to drive stuff... I think I'd talk to Moto Rapido about a re-mapping session, to make up for the PC that's no longer there. I don't know much about PCs, but I believe they don't/can't add more than 10% trim or so? Which I wouldn't have thought would have made that much difference. At least in my limited EFI tuning experience, you don't go from "massively lean" to "that's great" with a 10% trim, even though it'd certainly go a long way to letting you smooth out/address holes in the part-throttle map (which is where you spend 1000% of your time/the rest of your life, along with the warm-up cycle). Perhaps, when the bike ran well (assuming it ever did), it had different injectors? I know that a 900SSie and a M900ie ECU won't swap - although otherwise very similar, the 900SS and the M900 apparently use different injectors - the map isn't correct when you swap ECUs. Smaller injectors deliver less fuel for the same pulse width/duty cycle. Well, that's something ruled out, at least. |
|||
18-05-2021, 10:26 PM | #4 |
Registered User
Join Date: Mar 2021
Location: Carrickfergus
Bike: S4
Posts: 32
|
Spec I got with the bike
2001 S4 Engine removed and fully blueprinted Gearbox fully blueprinted Ducati Corse 955 Barrels Ducati Corse 955 pistons Ducati Corse 955 rods Ducati Corse 'G' spec cams Ducati Corse oil cooler kit Ducati Corse cam belts Ported and polished heads Vernier cam wheels Uprated ECU Power commander (no longer fitted) Custom 50mm Silmoto exhaust system Ducati Performance air box Lightened flywheel. This work was carried out by Moto-rapido of Winchester around 2004. Dyno run print out - Dr.Desmo June'04 119.1 BHP 151.8 Max speed 77.5 Max torque 10994 Max RPM |
18-05-2021, 11:11 PM | #5 |
.
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,713
|
Your ECU can be flashed/remapped.
I'm surprised Moto Rapido chose a Power Commander rather than remapping the original ECU. I don't know who's who in NI but given the racing community there, there must be Ducati equipped specialists you could call on. CJS (Bristol), BSD (Peterborough) or Moto Rapido (Winchester) are likely people to try for mapping on a dyno in GB. For mail order maps try Avanti Race Parts or Cornerspeed this side of the water, the result will never be as good as a dyno setup though Last edited by slob; 18-05-2021 at 11:14 PM.. |
20-06-2021, 01:58 PM | #6 | |
.
Join Date: May 2007
Location: Stockbridge
Bike: M900
Posts: 1,984
|
Quote:
http://www.redmaxspeedshop.com/redmaxspeedshop.html http://www.redmax-ducati.co.uk/
__________________
Original and Best since 1993 |
|
20-06-2021, 11:47 PM | #7 |
Registered User
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
|
Moto Rapido didn't have the facilities to reflash ECUs back in 2004, which probably explains the Power Commander. I had a PC III on my S2R 1000 and Wilf mapped it for me in 2007. They didn't have the ability to reflash until a couple of years later, if I remember correctly.
|
18-05-2021, 11:20 PM | #8 |
Registered User
Join Date: Mar 2021
Location: Carrickfergus
Bike: S4
Posts: 32
|
Cheers slob, gonna make a few enquiries
|
20-05-2021, 04:35 PM | #9 |
Registered User
Join Date: Mar 2021
Location: Carrickfergus
Bike: S4
Posts: 32
|
Thanks for taking the time to reply / explain.
"can of worms" is the phrase that comes to mind, a lot of unknowns with this bike, slowly eliminating things, hopefully can get to the bottom of it. Cheers Davey |
20-05-2021, 05:57 PM | #10 |
.
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,713
|
The 59M is overwritable without needing a UV eraser, earlier superbikes eg 851/888 and the first injected 2V (900ie) have that type of ECU, with a removable sticker on the chip.
Last edited by slob; 20-05-2021 at 06:07 PM.. |
21-05-2021, 11:59 AM | #11 | |
Registered User
Join Date: Apr 2016
Location: Farnborough
Bike: M900sie
Posts: 171
|
Quote:
Dodged that bullet entirely with my M900ies - because the DP ECU swap Just Works and fixes the stock "anemic below 3000" problem entirely satisfactorily for me. Pulls like a train from tickover in traffic with stock gearing and doesn't want to chuff out/die at 10 MPH.. For the IAW59M, this is one of those times I'm very happy to be wrong Poking around some map download databases appears at least some DP maps may include the DP part number as part of the version header - whereas the stock maps either are blank or provide the stock part # (but you can't rely on humans to be consistent, much less populate a database). Guess I'll know more when the cables turn up.. |
|
21-05-2021, 05:29 PM | #12 |
Registered User
Join Date: Mar 2021
Location: Carrickfergus
Bike: S4
Posts: 32
|
A mate of a mate has recommended a " Rexxer" as a means of remapping the ECU, by all accounts this guy is very knowledgeable on all things ECU related, just wondering has anyone used or even heard of this unit
Thanks Davey |
21-05-2021, 06:08 PM | #13 |
.
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,713
|
Yep, Rexxer make one of the commonly used ECU mapping tools. You've just got to find someone with a Dyno and the right Rexxer licenses/cables for Ducati ECUs
|
22-05-2021, 03:42 PM | #14 |
Registered User
Join Date: Apr 2016
Location: Farnborough
Bike: M900sie
Posts: 171
|
Rexxer units are probably very good. Given the prices, I doubt anyone but professionals are going to buy them: https://www.rexxer.eu/e_produkte.cfm
Heck, they want 98 euros for the Fiat lead I can buy all day long on Flea Bay for 5-10 quid... Chortle. London Electronic (website: lonelec.co.uk/lonelec.com) only rushed me 25 quid for a Fiat lead and a UK-built and tested ODBCII USB reader guaranteed to have the correct serial FTDI chip in it (as opposed to the Chinese clone/knock-off chip you might randomly get in a 5 quid no-name Chinese item). That said; for anything other than checking a map or maybe twiddling/resetting some minor settings, you're going to want a pro with the right gear; it makes no sense to try to flash maps and test-ride them against your butt-dyno (which are notoriously easily fooled); you really need instrumentation (at least wide-band lambda) and a rolling road. Because it's tough to find a private driveway long enough to let you see what AFRs you're getting under load at the top of 4th. Or how new PWM parameters work out for closed-loop boost control. It's also hard to over-emphasize how much more efficient logging makes tweaking the map - as opposed to trying to do it in real-time. |
21-06-2021, 04:12 AM | #15 | |
Transmaniacon MOC
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,026
|
Quote:
__________________
Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage |
|
|
|