![]() |
Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact | ![]() |
![]() |
|
![]() |
![]() |
Registered
Members: 600 | Total Threads: 50,791 | Total Posts: 518,268 Currently Active Users: 667 (0 active members) Please welcome our newest member, carthagho |
![]() |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Gold Member
Join Date: Mar 2004
Location: lincoln
Bike: No Bike Yet!
Posts: 876
|
Info needed
I am sure Luddite will be on the case with this one ;-)
What size/ thread pitch etc blanking bolt will I need to replace the exhaust lamba sensors on the exhaust downpipes please. Many Thanks, Chris. |
![]() |
![]() |
![]() |
#2 |
Moderator
Join Date: Apr 2008
Location: Moreton-in-Marsh
Bike: M1100evo
Posts: 1,082
|
__________________
IF ALL ELSE FAILS READ THE INSTRUCTIONS |
![]() |
![]() |
![]() |
#3 |
.
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,710
|
m18 x 1.5 for lambda sensors
1/8 BSPT for the service plugs on earlier models |
![]() |
![]() |
![]() |
#4 | |
Gold Member
Join Date: Mar 2004
Location: lincoln
Bike: No Bike Yet!
Posts: 876
|
Quote:
|
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
|
Hi, Chris. What slob said! Just make sure you get stainless ones as it's not always clear from eBay listings. I can't remember where I got mine but these look suitable:
https://www.ebay.co.uk/itm/2PCS-M18x...s/143548466962 |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
|
I've just found the relisting for the ones I bought. (UK supplier).
https://www.ebay.co.uk/itm/Stainless...t/124122395439 |
![]() |
![]() |
![]() |
#7 | |
Gold Member
Join Date: Mar 2004
Location: lincoln
Bike: No Bike Yet!
Posts: 876
|
Quote:
I am taking the pipes off to clean and polish them, yep lockdown is forcing me into the garage 😉😷 |
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
|
Before and after pictures please, Chris!
Sounds like a good way to pass lockdown. Unfortunately, I did all my Evo jobs over the winter, like brake bleeding and fuel filter replacement, so all I can do is keep buffing up the bodywork. I have got a set of Exactfit belts, which I was going to fit next winter, but maybe if I get really bored... |
![]() |
![]() |
![]() |
#9 |
Transmaniacon MOC
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,022
|
No point fitting belts if it's gonna be sat for however much longer?
__________________
Termignoni and Bucci - Italian for pipe and slippers! ![]() S4 Fogarty, S4R 07T, 748, Series 1 Mirage |
![]() |
![]() |
![]() |
#10 |
Gold Member
Join Date: Mar 2004
Location: lincoln
Bike: No Bike Yet!
Posts: 876
|
Ok, here we go hope the pics load up, sorry but already had the system was already off when I posted on the forum.
I also (as you can see from the pictures) swopped out the centre piece for one that had the butterfly valve removed and welded up (saves a little weight ![]() I only cleaned the pipes with the 10X on a sponge, then washed thoroughly and just used some T Cut as I did not have any autosolve ![]() https://postimg.cc/gallery/DzPZ7fp |
![]() |
![]() |
![]() |
#11 |
Transmaniacon MOC
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,022
|
![]()
__________________
Termignoni and Bucci - Italian for pipe and slippers! ![]() S4 Fogarty, S4R 07T, 748, Series 1 Mirage |
![]() |
![]() |
![]() |
#12 |
Gold Member
Join Date: Mar 2004
Location: lincoln
Bike: No Bike Yet!
Posts: 876
|
Thanks Darren
|
![]() |
![]() |
![]() |
|
|