problem

15-07-2006, 05:09 PM

my m600 dark will not stop turning over even with the key out dose any 1 have a clue what the problem is?
Spikey

15-07-2006, 05:12 PM

i have heard that 916s do that if there is water in the ignition wiring!!!!

15-07-2006, 05:49 PM

try the stater solonoid
its not that uncommon for them to stick

15-07-2006, 10:27 PM

Yep starter solenoid give it a tap with a large object next time it sticks,it's attached to the frame on the RHS two thick red wires going to it.

16-07-2006, 01:06 AM

rite hit it no power 2 the starter . got it 2 stop turning over now the push start dont work ? solinoind or push buton

16-07-2006, 10:20 AM

There are 4 wires going to it 2 big thick red ones ,the 1st think it's the top one with be live(have power to it all the time)

The 2nd big one only becomes live when the starter button is pressed and solenoid engauged.

There should be 2 smaller wires going to it one will be an earth and the other live(but only when starter button pressed).

Let me know what you get use a bulb,multimeter/testlamp etc.....

26-07-2006, 04:02 PM

solenoid it is bloody thing off to moto rapido tomorrow to get a new 1

15-07-2006, 05:09 PM	#1
doobury Guest Posts: n/a	problem my m600 dark will not stop turning over even with the key out dose any 1 have a clue what the problem is? Spikey

15-07-2006, 05:12 PM	#2
Andy Brown Guest Posts: n/a	i have heard that 916s do that if there is water in the ignition wiring!!!!

15-07-2006, 05:49 PM	#3
fatbloke Guest Posts: n/a	try the stater solonoid its not that uncommon for them to stick

15-07-2006, 10:27 PM	#4
bod Guest Posts: n/a	Yep starter solenoid give it a tap with a large object next time it sticks,it's attached to the frame on the RHS two thick red wires going to it.

16-07-2006, 01:06 AM	#5
doobury Guest Posts: n/a	rite hit it no power 2 the starter . got it 2 stop turning over now the push start dont work ? solinoind or push buton

16-07-2006, 10:20 AM	#6
bod Guest Posts: n/a	There are 4 wires going to it 2 big thick red ones ,the 1st think it's the top one with be live(have power to it all the time) The 2nd big one only becomes live when the starter button is pressed and solenoid engauged. There should be 2 smaller wires going to it one will be an earth and the other live(but only when starter button pressed). Let me know what you get use a bulb,multimeter/testlamp etc.....

26-07-2006, 04:02 PM	#7
doobury Guest Posts: n/a	solenoid it is bloody thing off to moto rapido tomorrow to get a new 1